HTS Codes / Chapter
Chapter 84
Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof
Section XVI — Machinery and mechanical appliances
| HTS code | Description | General rate |
|---|---|---|
| 8401 | Nuclear reactors; fuel elements (cartridges), non-irradiated, for nuclear reactors; machinery and apparatus for isotopic separation; parts thereof: | |
| 8401.10.00.00 | Nuclear reactors | 3.3% |
| 8401.20.00.00 | Machinery and apparatus for isotopic separation, and parts thereof | 2.6% |
| 8401.30.00.00 | Fuel elements (cartridges), non-irradiated, and parts thereof | 3.3% |
| 8401.40.00.00 | Parts of nuclear reactors | 3.3% |
| 8402 | Steam or other vapor generating boilers (other than central heating hot water boilers capable also of producing low pressure steam); super-heated water boilers; parts thereof: | |
| 8402.11.00.00 | Watertube boilers with a steam production exceeding 45 t per hour | 5.2% |
| 8402.12.00.00 | Watertube boilers with a steam production not exceeding 45 t per hour | 4.3% |
| 8402.19.00.00 | Other vapor generating boilers, including hybrid boilers | 5.2% |
| 8402.20.00.00 | Super-heated water boilers | 3.3% |
| 8402.90.00 | Parts | 4.3% |
| 8402.90.00.10 | Heat exchangers | |
| 8402.90.00.90 | Other | |
| 8403 | Central heating boilers (other than those of heading 8402) and parts thereof: | |
| 8403.10.00.00 | Boilers | Free |
| 8403.90.00.00 | Parts | Free |
| 8404 | Auxiliary plant for use with boilers of heading 8402 or 8403 (for example, economizers, super-heaters, soot removers, gas recoverers); condensers for steam or other vapor power units; parts thereof: | |
| 8404.10.00 | Auxiliary plant for use with boilers of heading 8402 or 8403 | 3.5% |
| 8404.10.00.10 | Economizers | |
| 8404.10.00.50 | Other | |
| 8404.20.00.00 | Condensers for steam or other vapor power units | 5% |
| 8404.90.00.00 | Parts | 3.5% |
| 8405 | Producer gas or water gas generators, with or without their purifiers; acetylene gas generators and similar water process gas generators, with or without their purifiers; parts thereof: | |
| 8405.10.00.00 | Producer gas or water gas generators, with or without their purifiers; acetylene gas generators and similar water process gas generators, with or without their purifiers | Free |
| 8405.90.00.00 | Parts | Free |
| 8406 | Steam turbines and other vapor turbines, and parts thereof: | |
| 8406.10 | Turbines for marine propulsion: | |
| 8406.10.10.00 | Steam turbines | 6.7% |
| 8406.10.90.00 | Other | Free |
| 8406.81 | Of an output exceeding 40 MW: | |
| 8406.81.10 | Steam turbines | 6.7% |
| 8406.81.10.20 | Stationary steam turbines, condensing type | |
| 8406.81.10.70 | Other | |
| 8406.81.90.00 | Other | Free |
| 8406.82 | Of an output not exceeding 40 MW: | |
| 8406.82.10 | Steam turbines | 6.7% |
| 8406.82.10.10 | Not exceeding <il>7,460 kW</il> | |
| 8406.82.10.20 | Exceeding <il>7,460 kW</il> | |
| 8406.82.10.50 | Not exceeding <il>7,460 kW</il> | |
| 8406.82.10.70 | Exceeding <il>7,460 kW</il> | |
| 8406.82.90.00 | Other | Free |
| 8406.90 | Parts: | |
| 8406.90.20.00 | Rotors, finished for final assembly | 5% |
| 8406.90.30.00 | Rotors, not further advanced than cleaned or machined for removal of fins, gates, sprues, and risers, or to permit location in finishing machinery | 5% |
| 8406.90.40.00 | Blades, rotating or stationary | 5% |
| 8406.90.45 | Other | 5% |
| 8406.90.45.40 | Rotors or spindles and rotor or spindle assemblies | |
| 8406.90.45.80 | Other | |
| 8406.90.50.00 | Rotors, finished for final assembly | Free |
| 8406.90.60.00 | Rotors, not further advanced than cleaned or machined for removal of fins, gates, sprues, and risers, or to permit location in finishing machinery | Free |
| 8406.90.70.00 | Blades, rotating or stationary | Free |
| 8406.90.75.00 | Other | Free |
| 8407 | Spark-ignition reciprocating or rotary internal combustion piston engines: | |
| 8407.10.00 | Aircraft engines | Free |
| 8407.10.00.20 | Less than <il>373 kW</il> | |
| 8407.10.00.40 | <il>373 kW</il> or over | |
| 8407.10.00.60 | Used or rebuilt | |
| 8407.10.00.90 | Other | |
| 8407.21.00 | Outboard motors | Free |
| 8407.21.00.40 | Less than <il>22.38 kW</il> | |
| 8407.21.00.80 | Other | |
| 8407.29.00 | Other | Free |
| 8407.29.00.10 | Inboard engines with outboard drive | |
| 8407.29.00.20 | Less than <il>746 W</il> | |
| 8407.29.00.30 | <il>746 W</il> or greater, but not exceeding <il>18.65 kW</il> | |
| 8407.29.00.40 | Exceeding <il>18.65 kW</il> | |
| 8407.31.00 | Of a cylinder capacity not exceeding <il>50 cc</il> | Free |
| 8407.31.00.40 | Less than <il>746 W</il> | |
| 8407.31.00.80 | Other | |
| 8407.32 | Of a cylinder capacity exceeding <il>50 cc</il> but not exceeding <il>250 cc</il>: | |
| 8407.32.10.00 | To be installed in tractors suitable for agricultural use | Free |
| 8407.32.20 | To be installed in vehicles of subheading 8701.21, 8701.22, 8701.23, 8701.24 or 8701.29, or heading 8702, 8703 or 8704 | Free |
| 8407.32.20.40 | Used or rebuilt | |
| 8407.32.20.80 | Other | |
| 8407.32.90 | Other | Free |
| 8407.32.90.40 | Not exceeding <il>18.65 kW</il> | |
| 8407.32.90.80 | Exceeding <il>18.65 kW</il> | |
| 8407.33 | Of a cylinder capacity exceeding <il>250 cc</il> but not exceeding <il>1,000 cc</il>: | |
| 8407.33.10 | To be installed in tractors suitable for agricultural use | Free |
| 8407.33.10.30 | Not exceeding <il>37.3 kW</il> | |
| 8407.33.10.60 | Air-cooled | |
| 8407.33.10.90 | Other | |
| 8407.33.30 | To be installed in vehicles specially designed for traveling on snow, golf carts, non-amphibious all-terrain vehicles and burden carriers | Free |
| 8407.33.30.40 | Used or rebuilt | |
| 8407.33.30.80 | Other | |
| 8407.33.60 | Other | 2.5% |
| 8407.33.60.40 | Used or rebuilt | |
| 8407.33.60.80 | Other | |
| 8407.33.90 | Other | Free |
| 8407.33.90.40 | Not exceeding <il>18.65 kW</il> | |
| 8407.33.90.80 | Exceeding <il>18.65 kW</il> | |
| 8407.34 | Of a cylinder capacity exceeding <il>1,000 cc</il>: | |
| 8407.34.05 | To be installed in tractors suitable for agricultural use | Free |
| 8407.34.05.30 | Not exceeding <il>37.3 kW</il> | |
| 8407.34.05.60 | Air-cooled | |
| 8407.34.05.90 | Other | |
| 8407.34.14.00 | Used or rebuilt | 2.5% |
| 8407.34.18.00 | Other | 2.5% |
| 8407.34.25.00 | Other | Free |
| 8407.34.35 | To be installed in tractors suitable for agricultural use | Free |
| 8407.34.35.30 | Not exceeding <il>37.3 kW</il> | |
| 8407.34.35.60 | Air-cooled | |
| 8407.34.35.90 | Other | |
| 8407.34.44.00 | Used or rebuilt | 2.5% |
| 8407.34.48.00 | Other | 2.5% |
| 8407.34.55.00 | Other | Free |
| 8407.90 | Other engines: | |
| 8407.90.10 | To be installed in agricultural or horticultural machinery or equipment | Free |
| 8407.90.10.10 | Less than 4,476 W | |
| 8407.90.10.20 | Other | |
| 8407.90.10.60 | Air-cooled | |
| 8407.90.10.80 | Other | |
| 8407.90.90 | Other | Free |
| 8407.90.90.10 | Gas (natural or liquid propane (LP)) engines | |
| 8407.90.90.20 | Less than <il>746 W</il> | |
| 8407.90.90.40 | <il>746 W</il> or greater but less than <il>4,476 W</il> | |
| 8407.90.90.60 | <il>4,476 W</il> or greater but not exceeding <il>18.65 kW</il> | |
| 8407.90.90.80 | Exceeding <il>18.65 kW</il> | |
| 8408 | Compression-ignition internal combustion piston engines (diesel or semi-diesel engines): | |
| 8408.10.00 | Marine propulsion engines | 2.5% |
| 8408.10.00.05 | Not exceeding <il>111.9 kW</il> | |
| 8408.10.00.15 | Exceeding <il>111.9 kW</il> but not exceeding <il>149.2 kW</il> | |
| 8408.10.00.20 | Exceeding <il>149.2 kW</il> but not exceeding <il>223.8 kW</il> | |
| 8408.10.00.30 | Exceeding <il>223.8 kW</il> but not exceeding <il>373 kW</il> | |
| 8408.10.00.40 | Exceeding <il>373 kW</il> but not exceeding <il>746 kW</il> | |
| 8408.10.00.50 | Exceeding <il>746 kW</il> | |
| 8408.20 | Engines of a kind used for the propulsion of vehicles of chapter 87: | |
| 8408.20.10 | To be installed in tractors suitable for agricultural use | Free |
| 8408.20.10.40 | Not exceeding <il>37.3 kW</il> | |
| 8408.20.10.80 | Exceeding <il>37.3 kW</il> | |
| 8408.20.20.00 | To be installed in vehicles of subheading 8701.21, 8701.22, 8701.23, 8701.24 or 8701.29, or heading 8702, 8703 or 8704 | 2.5% |
| 8408.20.90.00 | Other | 2.5% |
| 8408.90 | Other engines: | |
| 8408.90.10 | To be installed in agricultural or horticultural machinery or equipment | Free |
| 8408.90.10.40 | Not exceeding <il>37.3 kW</il> | |
| 8408.90.10.80 | Exceeding <il>37.3 kW</il> | |
| 8408.90.90 | Other | Free |
| 8408.90.90.10 | Not exceeding <il>149.2 kW</il> | |
| 8408.90.90.20 | Exceeding <il>149.2 kW</il> but not exceeding <il>373 kW</il> | |
| 8408.90.90.30 | Exceeding <il>373 kW </il>but not exceeding <il>746 kW</il> | |
| 8408.90.90.40 | Exceeding <il>746 kW</il> but not exceeding <il>1,119 kW</il> | |
| 8408.90.90.50 | Exceeding <il>1,119 kW</il> | |
| 8409 | Parts suitable for use solely or principally with the engines of heading 8407 or 8408: | |
| 8409.10.00 | For aircraft engines | Free |
| 8409.10.00.40 | For use in civil aircraft | |
| 8409.10.00.80 | Other | |
| 8409.91 | Suitable for use solely or principally with spark-ignition internal combustion piston engines (including rotary engines): | |
| 8409.91.10 | Cast-iron parts, not advanced beyond cleaning, and machined only for the removal of fins, gates, sprues and risers or to permit location in finishing machinery | Free |
| 8409.91.10.40 | For vehicles of subheading 8701.21, 8701.22, 8701.23, 8701.24 or 8701.29, or heading 8702, 8703 or 8704 | |
| 8409.91.10.60 | For marine propulsion engines | |
| 8409.91.10.80 | Other | |
| 8409.91.30.00 | Aluminum cylinder heads | 2.5% |
| 8409.91.50 | Other | 2.5% |
| 8409.91.50.10 | Connecting rods | |
| 8409.91.50.81 | Steel forgings | |
| 8409.91.50.85 | Other | |
| 8409.91.92 | For marine propulsion engines | 2.5% |
| 8409.91.92.10 | Connecting rods | |
| 8409.91.92.90 | Other | |
| 8409.91.99 | Other | 2.5% |
| 8409.91.99.10 | Connecting rods | |
| 8409.91.99.90 | Other | |
| 8409.99 | Other: | |
| 8409.99.10 | Cast-iron parts, not advanced beyond cleaning, and machined only for the removal of fins, gates, sprues and risers or to permit location in finishing machinery | Free |
| 8409.99.10.40 | For vehicles of subheading 8701.21, 8701.22, 8701.23, 8701.24 or 8701.29, or heading 8702, 8703 or 8704 | |
| 8409.99.10.60 | For marine propulsion engines | |
| 8409.99.10.80 | Other | |
| 8409.99.91 | To be installed in vehicles of subheading 8701.21, 8701.22, 8701.23, 8701.24 or 8701.29, or heading 8702, 8703 or 8704 | 2.5% |
| 8409.99.91.10 | Connecting rods | |
| 8409.99.91.90 | Other | |
| 8409.99.92 | For marine propulsion engines | 2.5% |
| 8409.99.92.10 | Connecting rods | |
| 8409.99.92.90 | Other | |
| 8409.99.99 | Other | Free |
| 8409.99.99.10 | Connecting rods | |
| 8409.99.99.90 | Other | |
| 8410 | Hydraulic turbines, water wheels and regulators therefor; parts thereof: | |
| 8410.11.00.00 | Of a power not exceeding <il>1,000 kW</il> | 3.8% |
| 8410.12.00.00 | Of a power exceeding <il>1,000 kW</il> but not exceeding <il>10,000 kW</il> | 3.8% |
| 8410.13.00.00 | Of a power exceeding <il>10,000 kW</il> | 3.8% |
| 8410.90.00.00 | Parts, including regulators | 3.8% |
| 8411 | Turbojets, turbopropellers and other gas turbines, and parts thereof: | |
| 8411.11 | Of a thrust not exceeding 25 kN: | |
| 8411.11.40.00 | Aircraft turbines | Free |
| 8411.11.80.00 | Other | Free |
| 8411.12 | Of a thrust exceeding 25 kN: | |
| 8411.12.40.00 | Aircraft turbines | Free |
| 8411.12.80.00 | Other | Free |
| 8411.21 | Of a power not exceeding <il>1,100 kW</il>: | |
| 8411.21.40.00 | Aircraft turbines | Free |
| 8411.21.80.00 | Other | Free |
| 8411.22 | Of a power exceeding <il>1,100 kW</il>: | |
| 8411.22.40.00 | Aircraft turbines | Free |
| 8411.22.80.00 | Other | Free |
| 8411.81 | Of a power not exceeding <il>5,000 kW</il>: | |
| 8411.81.40.00 | Aircraft turbines | Free |
| 8411.81.80 | Other | 2.5% |
| 8411.81.80.10 | Industrial turbines of a kind described in statistical note 1 of this chapter | |
| 8411.81.80.90 | Other | |
| 8411.82 | Of a power exceeding <il>5,000 kW</il>: | |
| 8411.82.40.00 | Aircraft turbines | Free |
| 8411.82.80 | Other | 2.5% |
| 8411.82.80.10 | Industrial turbines of a kind described in statistical note 1 to this chapter | |
| 8411.82.80.90 | Other | |
| 8411.91 | Of turbojets or turbopropellers: | |
| 8411.91.10 | Cast-iron parts, not advanced beyond cleaning, and machined only for the removal of fins, gates, sprues and risers or to permit location in finishing machinery | Free |
| 8411.91.10.40 | Parts of nonaircraft turbines | |
| 8411.91.10.60 | For use in civil aircraft | |
| 8411.91.10.90 | Other | |
| 8411.91.90 | Other | Free |
| 8411.91.90.40 | Parts of nonaircraft turbines | |
| 8411.91.90.81 | Steel forgings | |
| 8411.91.90.85 | Other | |
| 8411.99 | Other: | |
| 8411.99.10 | Cast-iron parts, not advanced beyond cleaning, and machined only for the removal of fins, gates, sprues and risers or to permit location in finishing machinery | Free |
| 8411.99.10.10 | Parts of nonaircraft gas turbines | |
| 8411.99.10.40 | For use in civil aircraft | |
| 8411.99.10.80 | Other | |
| 8411.99.90 | Other | 2.4% |
| 8411.99.90.30 | Rotors or spindles and rotor or spindle assemblies | |
| 8411.99.90.81 | Steel forgings | |
| 8411.99.90.85 | Other | |
| 8411.99.90.90 | Parts of aircraft gas turbines | |
| 8412 | Other engines and motors, and parts thereof: | |
| 8412.10.00 | Reaction engines other than turbojets | Free |
| 8412.10.00.10 | Missile and rocket engines | |
| 8412.10.00.90 | Other | |
| 8412.21.00 | Linear acting (cylinders) | Free |
| 8412.21.00.15 | Tie-rod type | |
| 8412.21.00.30 | Weld fused type | |
| 8412.21.00.45 | Telescoping | |
| 8412.21.00.60 | Rodless | |
| 8412.21.00.75 | Other | |
| 8412.29 | Other: | |
| 8412.29.40.00 | Hydrojet engines for marine propulsion | Free |
| 8412.29.80 | Other | Free |
| 8412.29.80.15 | Gear type | |
| 8412.29.80.30 | Radial piston type | |
| 8412.29.80.45 | Axial piston type | |
| 8412.29.80.60 | Other | |
| 8412.29.80.75 | Other | |
| 8412.31.00 | Linear acting (cylinders) | Free |
| 8412.31.00.40 | Tie-rod type | |
| 8412.31.00.80 | Other | |
| 8412.39.00 | Other | Free |
| 8412.39.00.40 | Unlimited rotary acting | |
| 8412.39.00.80 | Other | |
| 8412.80 | Other engines and motors: | |
| 8412.80.10.00 | Spring-operated and weight-operated motors | Free |
| 8412.80.90.00 | Other | Free |
| 8412.90 | Parts: | |
| 8412.90.10.00 | Of hydrojet engines for marine propulsion | Free |
| 8412.90.90 | Other | Free |
| 8412.90.90.05 | Of linear acting engines and motors | |
| 8412.90.90.15 | Other | |
| 8412.90.90.25 | Of linear acting engines and motors | |
| 8412.90.90.35 | Other | |
| 8412.90.90.50 | Of reaction engines other than turbojets | |
| 8412.90.90.70 | Wind turbine blades, imported in accordance with statistical note 2 of this chapter | |
| 8412.90.90.75 | Wind turbine hubs | |
| 8412.90.90.85 | Other | |
| 8413 | Pumps for liquids, whether or not fitted with a measuring device; liquid elevators; part thereof: | |
| 8413.11.00.00 | Pumps for dispensing fuel or lubricants, of the type used in filling-stations or in garages | Free |
| 8413.19.00.00 | Other | Free |
| 8413.20.00.00 | Hand pumps, other than those of subheading 8413.11 or 8413.19 | Free |
| 8413.30 | Fuel, lubricating or cooling medium pumps for internal combustion piston engines: | |
| 8413.30.10.00 | Fuel-injection pumps for compression-ignition engines | 2.5% |
| 8413.30.90 | Other | 2.5% |
| 8413.30.90.30 | Fuel pumps | |
| 8413.30.90.60 | Lubricating pumps | |
| 8413.30.90.90 | Other | |
| 8413.40.00.00 | Concrete pumps | Free |
| 8413.50.00 | Other reciprocating positive displacement pumps | Free |
| 8413.50.00.10 | Oil well and oil field pumps | |
| 8413.50.00.50 | Diaphragm pumps | |
| 8413.50.00.70 | Radial piston type | |
| 8413.50.00.80 | Other | |
| 8413.50.00.90 | Other | |
| 8413.60.00 | Other rotary positive displacement pumps | Free |
| 8413.60.00.20 | Vane type | |
| 8413.60.00.30 | Gear type | |
| 8413.60.00.40 | Other | |
| 8413.60.00.50 | Oil well and oil field pumps | |
| 8413.60.00.70 | Roller pumps | |
| 8413.60.00.90 | Other | |
| 8413.70 | Other centrifugal pumps: | |
| 8413.70.10.00 | Stock pumps imported for use with machines for making cellulosic pulp, paper or paperboard | Free |
| 8413.70.20 | Other | Free |
| 8413.70.20.04 | Submersible pumps | |
| 8413.70.20.05 | With discharge outlet under <il>5.08 cm</il> in diameter | |
| 8413.70.20.15 | With discharge outlet <il>5.08 cm</il> or over in diameter | |
| 8413.70.20.22 | With discharge outlet under <il>7.6 cm</il> in diameter | |
| 8413.70.20.25 | With discharge outlet <il>7.6 cm</il> or over in diameter | |
| 8413.70.20.30 | Single-stage, double-suction | |
| 8413.70.20.40 | Multi-stage, single- or double-suction | |
| 8413.70.20.90 | Other | |
| 8413.81.00 | Pumps | Free |
| 8413.81.00.20 | Turbine pumps | |
| 8413.81.00.30 | Household water systems, self-contained; and windmill pumps | |
| 8413.81.00.40 | Other | |
| 8413.82.00.00 | Liquid elevators | Free |
| 8413.91 | Of pumps: | |
| 8413.91.10.00 | Of fuel-injection pumps for compression-ignition engines | 2.5% |
| 8413.91.20.00 | Of stock pumps imported for use with machines for making cellulosic pulp, paper or paperboard | Free |
| 8413.91.90 | Other | Free |
| 8413.91.90.10 | Of subheading 8413.30.90 | |
| 8413.91.90.55 | Fluid end blocks | |
| 8413.91.90.60 | Other | |
| 8413.91.90.65 | Sucker rods of a kind described in statistical note 3 to this chapter | |
| 8413.91.90.85 | Other | |
| 8413.91.90.96 | Other | |
| 8413.92.00.00 | Of liquid elevators | Free |
| 8414 | Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters; gas-tight biological safety cabinets, whether or not fitted with filters; parts thereof: | |
| 8414.10.00.00 | Vacuum pumps | 2.5% |
| 8414.20.00.00 | Hand- or foot-operated air pumps | 3.7% |
| 8414.30 | Compressors of a kind used in refrigerating equipment (including air conditioning): | |
| 8414.30.40.00 | Not exceeding 1/4 horsepower | Free |
| 8414.30.80 | Other | Free |
| 8414.30.80.10 | Not exceeding 200 horsepower | |
| 8414.30.80.20 | Exceeding 200 horsepower | |
| 8414.30.80.30 | For motor vehicles | |
| 8414.30.80.50 | Exceeding 1/4 horsepower but not exceeding 1 horsepower | |
| 8414.30.80.60 | Exceeding 1 horsepower but not exceeding 3 horsepower | |
| 8414.30.80.70 | Exceeding 3 horsepower but not exceeding 10 horsepower | |
| 8414.30.80.80 | Exceeding 10 horsepower | |
| 8414.30.80.90 | For ammonia | |
| 8414.40.00.00 | Air compressors mounted on a wheeled chassis for towing | 2.7% |
| 8414.51 | Table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output not exceeding 125 W: | |
| 8414.51.30.00 | Ceiling fans for permanent installation | 4.7% |
| 8414.51.90 | Other | 4.7% |
| 8414.51.90.60 | For permanent installation | |
| 8414.51.90.90 | Other | |
| 8414.59 | Other: | |
| 8414.59.10.00 | Blowers for pipe organs | Free |
| 8414.59.15.00 | Fans of a kind used solely or principally for cooling microprocessors, telecommunications apparatus, automatic data processing machines or units of automatic data processing machines | Free |
| 8414.59.30.00 | Turbochargers and superchargers | 2.3% |
| 8414.59.65 | Other | 2.3% |
| 8414.59.65.40 | Suitable for use with motor vehicles | |
| 8414.59.65.60 | Centrifugal | |
| 8414.59.65.90 | Axial | |
| 8414.59.65.95 | Other | |
| 8414.60.00.00 | Hoods having a maximum horizontal side not exceeding <il>120 cm</il> | Free |
| 8414.70.00.00 | Gas-tight biological safety cabinets | Free |
| 8414.80 | Other, except parts: | |
| 8414.80.05.00 | Turbochargers and superchargers | Free |
| 8414.80.16 | Other | Free |
| 8414.80.16.05 | Not exceeding <il>746 W</il> | |
| 8414.80.16.15 | Exceeding <il>746 W</il> but not exceeding <il>4.48 kW</il> | |
| 8414.80.16.25 | Exceeding <il>4.48 kW</il> but not exceeding <il>8.21 kW</il> | |
| 8414.80.16.35 | Exceeding <il>8.21 kW</il> but not exceeding <il>11.19 kW</il> | |
| 8414.80.16.40 | Exceeding <il>11.19 kW</il> but not exceeding <il>19.4 kW</il> | |
| 8414.80.16.45 | Exceeding <il>19.4 kW</il> but not exceeding <il>74.6 kW</il> | |
| 8414.80.16.55 | Exceeding <il>74.6 kW</il> | |
| 8414.80.16.60 | Not exceeding <il>11.19 kW</il> | |
| 8414.80.16.65 | Exceeding <il>11.19 kW</il> but under <il>22.38 kW</il> | |
| 8414.80.16.70 | <il>22.38 kW</il> and over but not exceeding <il>74.6 kW</il> | |
| 8414.80.16.75 | Exceeding <il>74.6 kW</il> | |
| 8414.80.16.80 | Other | |
| 8414.80.16.85 | Under <il>0.57 cubic</il> meters per minute | |
| 8414.80.16.90 | Other | |
| 8414.80.20 | Other compressors | Free |
| 8414.80.20.05 | Refrigerant recovery units | |
| 8414.80.20.15 | Centrifugal and axial | |
| 8414.80.20.55 | Not exceeding <il>186.5 kW</il> | |
| 8414.80.20.65 | Exceeding <il>186.5 kW</il> but not exceeding <il>746 kW</il> | |
| 8414.80.20.75 | Exceeding <il>746 kW</il> | |
| 8414.80.90.00 | Other | 3.7% |
| 8414.90 | Parts: | |
| 8414.90.10 | Of fans (including blowers) and ventilating or recycling hoods | 4.7% |
| 8414.90.10.40 | Of fans of subheading 8414.51 | |
| 8414.90.10.80 | Other | |
| 8414.90.30.00 | Stators and rotors of goods of subheading 8414.30 | Free |
| 8414.90.41 | Other | Free |
| 8414.90.41.20 | Compressor housings | |
| 8414.90.41.40 | Other | |
| 8414.90.41.45 | Compressor housings | |
| 8414.90.41.55 | Other | |
| 8414.90.41.65 | Compressor housings | |
| 8414.90.41.80 | Impeller covers and hubs | |
| 8414.90.41.90 | Other | |
| 8414.90.91 | Other | Free |
| 8414.90.91.40 | Of vacuum pumps | |
| 8414.90.91.80 | Other | |
| 8415 | Air conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, including those machines in which the humidity cannot be separately regulated; parts thereof: | |
| 8415.10 | Of a kind designed to be fixed to a window, wall, ceiling or floor, self-contained or “split system”: | |
| 8415.10.30 | Self-contained | Free |
| 8415.10.30.40 | Less than <il>2.93 kW</il> per hour | |
| 8415.10.30.60 | <il>2.93 kW</il> per hour or greater but less than <il>4.98 kW</il> per hour | |
| 8415.10.30.80 | <il>4.98 kW</il> per hour or greater | |
| 8415.10.60.00 | Incorporating a refrigerating unit and a valve for reversal of the cooling/heat cycle (reversible heat pumps) | 1% |
| 8415.10.90.00 | Other | 2.2% |
| 8415.20.00.00 | Of a kind used for persons, in motor vehicles | 1.4% |
| 8415.81.01 | Incorporating a refrigerating unit and a valve for reversal of the cooling/heat cycle (reversible heat pumps) | 1% |
| 8415.81.01.10 | Not exceeding <il>17.58 kW</il> per hour | |
| 8415.81.01.20 | Exceeding <il>17.58 kW</il> per hour | |
| 8415.81.01.30 | Other | |
| 8415.82.01 | Other, incorporating a refrigerating unit | 2.2% |
| 8415.82.01.05 | Not exceeding <il>17.58 kW</il> per hour | |
| 8415.82.01.10 | Exceeding <il>17.58 kW</il> per hour | |
| 8415.82.01.15 | Not exceeding <il>17.58 kW</il> per hour | |
| 8415.82.01.20 | Exceeding <il>17.58 kW</il> per hour | |
| 8415.82.01.30 | Room fan coil units | |
| 8415.82.01.35 | Central station air handlers | |
| 8415.82.01.40 | Other | |
| 8415.82.01.55 | With a rated water removal capacity of less than <il>35 liters</il> over a 24 hour period | |
| 8415.82.01.60 | Other | |
| 8415.82.01.70 | Other air conditioning machines incorporating a refrigerating unit | |
| 8415.83.00 | Not incorporating a refrigerating unit | 1.4% |
| 8415.83.00.50 | Not exceeding <il>17.58 kW</il> per hour | |
| 8415.83.00.60 | Exceeding <il>17.58 kW</il> per hour | |
| 8415.83.00.70 | Other | |
| 8415.83.00.90 | Other air conditioning machines not incorporating a refrigerating unit | |
| 8415.90 | Parts: | |
| 8415.90.40.00 | Chassis, chassis bases and outer cabinets | 1.4% |
| 8415.90.80 | Other | 1.4% |
| 8415.90.80.10 | Of copper or copper alloys | |
| 8415.90.80.20 | Other | |
| 8415.90.80.45 | Of automotive air conditioners | |
| 8415.90.80.50 | Of copper or copper alloys | |
| 8415.90.80.70 | Other | |
| 8415.90.80.85 | Other | |
| 8416 | Furnace burners for liquid fuel, for pulverized solid fuel or for gas; mechanical stokers, including their mechanical grates, mechanical ash dischargers and similar appliances; parts thereof: | |
| 8416.10.00.00 | Furnace burners for liquid fuel | Free |
| 8416.20.00 | Other furnace burners, including combination burners | Free |
| 8416.20.00.40 | Gas burners | |
| 8416.20.00.80 | Other | |
| 8416.30.00.00 | Mechanical stokers, including their mechanical grates, mechanical ash dischargers and similar appliances | Free |
| 8416.90.00.00 | Parts | Free |
| 8417 | Industrial or laboratory furnaces and ovens, including incinerators, nonelectric, and parts thereof: | |
| 8417.10.00.00 | Furnaces and ovens for the roasting, melting or other heat treatment of ores, pyrites or of metals | 2.9% |
| 8417.20.00.00 | Bakery ovens, including biscuit ovens | 3.5% |
| 8417.80.00.00 | Other, except parts | 3.9% |
| 8417.90.00.00 | Parts | 3.9% |
| 8418 | Refrigerators, freezers and other refrigerating or freezing equipment, electric or other; heat pumps, other than the air conditioning machines of heading 8415; parts thereof: | |
| 8418.10.00 | Combined refrigerator-freezers, fitted with separate external doors or drawers, or combinations thereof | Free |
| 8418.10.00.10 | Having a refrigerated volume of under <il>184 liters</il> | |
| 8418.10.00.20 | Having a refrigerated volume of <il>184 liters</il> and over but under <il>269 liters</il> | |
| 8418.10.00.30 | Having a refrigerated volume of <il>269 liters</il> and over but under <il>382 liters</il> | |
| 8418.10.00.45 | Having an external depth (excluding door handles) not exceeding <il>73 centimeters</il> | |
| 8418.10.00.55 | Other | |
| 8418.10.00.65 | Other | |
| 8418.10.00.80 | Refrigerators with a top freezer compartment | |
| 8418.10.00.85 | Other | |
| 8418.10.00.90 | Other | |
| 8418.21.00 | Compression type | Free |
| 8418.21.00.10 | Having a refrigerated volume of under <il>184 liters</il> | |
| 8418.21.00.20 | Having a refrigerated volume of <il>184 liters</il> and over but under <il>269 liters</il> | |
| 8418.21.00.30 | Having a refrigerated volume of <il>269 liters</il> and over but under <il>382 liters</il> | |
| 8418.21.00.90 | Having a refrigerated volume of <il>382 liters</il> and over | |
| 8418.29 | Other: | |
| 8418.29.10.00 | Absorption type, electrical | 1% |
| 8418.29.20.00 | Other | 1.9% |
| 8418.30.00.00 | Freezers of the chest type, not exceeding <il>800 liters</il> capacity | Free |
| 8418.40.00.00 | Freezers of the upright type, not exceeding <il>900 liters</il> capacity | Free |
| 8418.50.00 | Other furniture (chests, cabinets, display counters, show-cases and the like) for storage and display, incorporating refrigerating or freezing equipment | Free |
| 8418.50.00.40 | Freezing | |
| 8418.50.00.80 | Other | |
| 8418.61.01.00 | Heat pumps other than air conditioning machines of heading 8415 | Free |
| 8418.69.01 | Other | Free |
| 8418.69.01.10 | Icemaking machines | |
| 8418.69.01.20 | Drinking water coolers, self-contained | |
| 8418.69.01.30 | Soda fountain and beer dispensing equipment | |
| 8418.69.01.40 | Centrifugal liquid chilling refrigerating units | |
| 8418.69.01.50 | Reciprocating liquid chilling refrigerating units | |
| 8418.69.01.60 | Absorption liquid chilling units | |
| 8418.69.01.80 | Other refrigerating or freezing equipment | |
| 8418.91.00.00 | Furniture designed to receive refrigerating or freezing equipment | Free |
| 8418.99 | Other: | |
| 8418.99.40.00 | Door assemblies incorporating more than one of the following: inner panel; outer panel; insulation; hinges; handles | Free |
| 8418.99.80 | Other | Free |
| 8418.99.80.05 | Not exceeding <il>746 W</il> | |
| 8418.99.80.10 | Exceeding <il>746 W</il> but not exceeding <il>2.2 kW</il> | |
| 8418.99.80.15 | Exceeding <il>2.2 kW</il> but not exceeding <il>7.5 kW</il> | |
| 8418.99.80.20 | Exceeding <il>7.5 kW</il> but not exceeding <il>22.3 kW</il> | |
| 8418.99.80.25 | Exceeding <il>22.3 kW</il> | |
| 8418.99.80.50 | Parts of combined refrigerator-freezers fitted with separate external doors and parts of household type refrigerators | |
| 8418.99.80.60 | Other | |
| 8419 | Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilizing, pasteurizing, steaming, drying, evaporating, vaporizing, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, nonelectric; parts thereof: | |
| 8419.11.00.00 | Instantaneous gas water heaters | Free |
| 8419.12.00.00 | Solar water heaters | Free |
| 8419.19.01 | Other | Free |
| 8419.19.01.20 | Instantaneous water heaters | |
| 8419.19.01.60 | Other | |
| 8419.20.00 | Medical, surgical or laboratory sterilizers | Free |
| 8419.20.00.10 | Medical or surgical sterilizers | |
| 8419.20.00.20 | Laboratory sterilizers | |
| 8419.33 | Lyophilisation apparatus, freeze drying units and spray dryers: | |
| 8419.33.10.00 | For agricultural products | Free |
| 8419.33.50.00 | Other | Free |
| 8419.34.00.00 | Other, for agricultural products | Free |
| 8419.35 | Other, for wood, paper pulp, paper or paperboard | |
| 8419.35.10.00 | For wood | Free |
| 8419.35.50.00 | Other | Free |
| 8419.39.02 | Other | Free |
| 8419.39.02.70 | For foods and beverages | |
| 8419.39.02.80 | Other | |
| 8419.40.00 | Distilling or rectifying plant | Free |
| 8419.40.00.40 | For food and beverages | |
| 8419.40.00.80 | Other | |
| 8419.50 | Heat exchange units: | |
| 8419.50.10.00 | Brazed aluminum plate-fin heat exchangers | 4.2% |
| 8419.50.50.00 | Other | Free |
| 8419.60 | Machinery for liquefying air or other gases: | |
| 8419.60.10.00 | Machinery containing brazed aluminum plate-fin heat exchangers | 4.2% |
| 8419.60.50.00 | Other | Free |
| 8419.81 | For making hot drinks or for cooking or heating food: | |
| 8419.81.50 | Cooking stoves, ranges and ovens | Free |
| 8419.81.50.40 | For use in civil aircraft | |
| 8419.81.50.80 | Other | |
| 8419.81.90 | Other | Free |
| 8419.81.90.40 | Of a type used in restaurants, hotels or similar locations | |
| 8419.81.90.80 | Other | |
| 8419.89 | Other: | |
| 8419.89.10.00 | For making paper pulp, paper or paperboard | Free |
| 8419.89.60.00 | Molten-salt-cooled acrylic acid reactors | Free |
| 8419.89.95 | Other | 4.2% |
| 8419.89.95.20 | For food and beverages | |
| 8419.89.95.40 | Other | |
| 8419.89.95.60 | For food and beverages | |
| 8419.89.95.80 | For rubber and plastics | |
| 8419.89.95.85 | For other materials | |
| 8419.90 | Parts: | |
| 8419.90.10.00 | Of instantaneous or storage water heaters | Free |
| 8419.90.20.00 | Of machinery and plant for making paper pulp, paper or paperboard | Free |
| 8419.90.30.00 | Of heat exchange units | Free |
| 8419.90.50 | Of molten-salt-cooled acrylic acid reactors; of medical, surgical or laboratory sterilizers | Free |
| 8419.90.50.40 | Of medical, surgical or laboratory sterilizers | |
| 8419.90.50.80 | Other | |
| 8419.90.85.00 | Of electromechanical tools for working in the hand with self-contained electric motor | Free |
| 8419.90.95 | Other | 4% |
| 8419.90.95.20 | Of an apparatus of a type used in restaurants, hotels or similar locations | |
| 8419.90.95.80 | Other | |
| 8420 | Calendering or other rolling machines, other than for metals or glass, and cylinders therefor; parts thereof: | |
| 8420.10 | Calendering or other rolling machines: | |
| 8420.10.10.00 | Textile calendering or rolling machines | 3.5% |
| 8420.10.20.00 | Calendering or similar rolling machines for making paper pulp, paper or paperboard | Free |
| 8420.10.90 | Other | Free |
| 8420.10.90.40 | Calendering or other rolling machines for rubber and plastics | |
| 8420.10.90.80 | Other | |
| 8420.91 | Cylinders: | |
| 8420.91.10.00 | For textile calendering or rolling machines | 2.6% |
| 8420.91.20.00 | For calendering or other rolling machines for machines for making paper pulp, paper or paperboard | Free |
| 8420.91.90.00 | Other | Free |
| 8420.99 | Other: | |
| 8420.99.10.00 | Of machines for processing textiles | 3.5% |
| 8420.99.20.00 | Of machines for making paper pulp, paper or paperboard | Free |
| 8420.99.90.00 | Other | Free |
| 8421 | Centrifuges, including centrifugal dryers; filtering or purifying machinery and apparatus, for liquids or gases; parts thereof: | |
| 8421.11.00.00 | Cream separators | Free |
| 8421.12.00.00 | Clothes-dryers | Free |
| 8421.19.00.00 | Other | 1.3% |
| 8421.21.00.00 | For filtering or purifying water | Free |
| 8421.22.00.00 | For filtering or purifying beverages other than water | Free |
| 8421.23.00.00 | Oil or fuel filters for internal combustion engines | 2.5% |
| 8421.29.00 | Other | Free |
| 8421.29.00.05 | Refrigerant recovery and recycling units | |
| 8421.29.00.15 | Oil-separation equipment | |
| 8421.29.00.40 | Hydraulic fluid power filters, rated at <il>1,000 kPa</il> or greater | |
| 8421.29.00.65 | Other | |
| 8421.31.00.00 | Intake air filters for internal combustion engines | 2.5% |
| 8421.32.00.00 | Catalytic converters or particulate filters, whether or not combined, for purifying or filtering exhaust gases from internal combustion engines | Free |
| 8421.39.01 | Other | Free |
| 8421.39.01.05 | For machine tools of headings 8456 through 8465, inclusive | |
| 8421.39.01.15 | Other | |
| 8421.39.01.20 | Electrostatic precipitators | |
| 8421.39.01.30 | Other | |
| 8421.39.01.40 | Gas separation equipment | |
| 8421.39.01.60 | Pneumatic fluid power filters, rated at <il>550 kPa</il> or greater | |
| 8421.39.01.90 | Other | |
| 8421.91 | Of centrifuges, including centrifugal dryers: | |
| 8421.91.20.00 | Drying chambers for the clothes-dryers of subheading 8421.12 and other parts of clothes-dryers incorporating drying chambers | Free |
| 8421.91.40.00 | Furniture designed to receive the clothes-dryers of subheading 8421.12 | Free |
| 8421.91.60.00 | Other | Free |
| 8421.99.01 | Other | Free |
| 8421.99.01.40 | Parts of machinery and apparatus for filtering or purifying water | |
| 8421.99.01.80 | Other | |
| 8422 | Dishwashing machines; machinery for cleaning or drying bottles or other containers; machinery for filling, closing, sealing or labeling bottles, cans, boxes, bags or other containers; machinery for capsuling bottles, jars, tubes and similar containers; other packing or wrapping machinery (including heat-shrink wrapping machinery); machinery for aerating beverages; parts thereof: | |
| 8422.11.00.00 | Of the household type | 2.4% |
| 8422.19.00.00 | Other | Free |
| 8422.20.00.00 | Machinery for cleaning or drying bottles or other containers | Free |
| 8422.30 | Machinery for filling, closing, sealing or labeling bottles, cans, boxes, bags or other containers; machinery for capsuling bottles, jars, tubes and similar containers; machinery for aerating beverages: | |
| 8422.30.11.00 | Can-sealing machines | Free |
| 8422.30.91 | Other | Free |
| 8422.30.91.10 | Machines for aerating beverages | |
| 8422.30.91.20 | Labeling machines | |
| 8422.30.91.30 | Vacuum or gas packaging | |
| 8422.30.91.40 | Other | |
| 8422.30.91.50 | Vacuum or gas packaging | |
| 8422.30.91.60 | Other | |
| 8422.30.91.70 | Other | |
| 8422.30.91.80 | Machines for opening, filling and closing bags | |
| 8422.30.91.85 | Machines for forming, filling and sealing bags/pouches | |
| 8422.30.91.86 | Machines for opening, filling and closing boxes | |
| 8422.30.91.87 | Machines for skin and blister packaging | |
| 8422.30.91.91 | Other | |
| 8422.40 | Other packing or wrapping machinery (including heat-shrink wrapping machinery): | |
| 8422.40.11 | Machines for packaging pipe tobacco; machines for wrapping candy; machines for wrapping cigarette packages; and combination candy cutting and wrapping machines | Free |
| 8422.40.11.10 | Machines for wrapping candy | |
| 8422.40.11.90 | Other | |
| 8422.40.91 | Other | Free |
| 8422.40.91.40 | Strapping machines | |
| 8422.40.91.50 | Machines for case and tray forming, packing, unpacking, closing and sealing | |
| 8422.40.91.60 | Machines for shrink film and heat sealing | |
| 8422.40.91.70 | Machines for wrapping | |
| 8422.40.91.81 | Other | |
| 8422.90 | Parts: | |
| 8422.90.02.00 | Water containment chambers for the dishwashing machines of subheading 8422.11 and other parts of dishwashing machines of the household type incorporating water containment chambers | Free |
| 8422.90.04.00 | Door assemblies for the dishwashing machines of subheading 8422.11 | Free |
| 8422.90.06 | Other | Free |
| 8422.90.06.40 | Of the household type | |
| 8422.90.06.80 | Other | |
| 8422.90.11.00 | Of can-sealing machines | Free |
| 8422.90.21.00 | Of machines for packaging pipe tobacco, wrapping candy or wrapping cigarette packages, and of combination candy cutting and wrapping machines | Free |
| 8422.90.91 | Other | Free |
| 8422.90.91.20 | Of machinery for cleaning or drying bottles or other containers | |
| 8422.90.91.30 | Of strapping machines | |
| 8422.90.91.60 | Of other wrapping and packaging machines | |
| 8422.90.91.95 | Other | |
| 8423 | Weighing machinery (excluding balances of a sensitivity of 5 cg or better), including weight-operated counting or checking machines; weighing machine weights of all kinds; parts of weighing machinery: | |
| 8423.10.00 | Personal weighing machines, including baby scales; household scales | Free |
| 8423.10.00.10 | Digital electronic type | |
| 8423.10.00.30 | Of a kind suitable for carrying on the person | |
| 8423.10.00.60 | Other | |
| 8423.20 | Scales for continuous weighing of goods on conveyors: | |
| 8423.20.10.00 | Using electronic means for gauging weights | Free |
| 8423.20.90.00 | Other | 2.9% |
| 8423.30.00.00 | Constant-weight scales and scales for discharging a predetermined weight of material into a bag or container, including hopper scales | Free |
| 8423.81.00 | Having a maximum weighing capacity not exceeding <il>30 kg</il> | Free |
| 8423.81.00.10 | Counting scales | |
| 8423.81.00.20 | Retail scales, non-computing | |
| 8423.81.00.30 | Retail scales, computing | |
| 8423.81.00.40 | Other | |
| 8423.81.00.50 | Other | |
| 8423.82.00 | Having a maximum weighing capacity exceeding <il>30 kg</il> but not exceeding <il>5,000 kg</il> | Free |
| 8423.82.00.10 | Digital electronic type | |
| 8423.82.00.50 | Other | |
| 8423.89 | Other: | |
| 8423.89.10.00 | Using electronic means for gauging | Free |
| 8423.89.90.00 | Other | 2.9% |
| 8423.90 | Weighing machine weights of all kinds; parts of weighing machinery: | |
| 8423.90.10.00 | Parts of weighing machinery using electronic means for gauging weight, excluding parts of machines for weighing motor vehicles | Free |
| 8423.90.90.00 | Other | 2.8% |
| 8424 | Mechanical appliances (whether or not hand operated) for projecting, dispersing or spraying liquids or powders; fire extinguishers, whether or not charged; spray guns and similar appliances; steam or sand blasting machines and similar jet projecting machines; parts thereof: | |
| 8424.10.00.00 | Fire extinguishers, whether or not charged | Free |
| 8424.20 | Spray guns and similar appliances: | |
| 8424.20.10.00 | Simple piston pump sprays and powder bellows | 2.9% |
| 8424.20.90.00 | Other | Free |
| 8424.30 | Steam or sand blasting machines and similar jet projecting machines: | |
| 8424.30.10.00 | Sand blasting machines | Free |
| 8424.30.90.00 | Other | Free |
| 8424.41 | Portable sprayers: | |
| 8424.41.10.00 | Sprayers (except sprayers, self-contained, having a capacity not over 20 liters) | Free |
| 8424.41.90.00 | Other | 2.4% |
| 8424.49.00.00 | Other | 2.4% |
| 8424.82.00 | Agricultural or horticultural | 2.4% |
| 8424.82.00.10 | Self-propelled, center pivot | |
| 8424.82.00.20 | Other | |
| 8424.82.00.90 | Other | |
| 8424.89.10.00 | Mechanical appliances for projecting, dispersing or spraying, of a kind used solely or principally for the manufacture of printed circuits or printed circuit assemblies | Free |
| 8424.89.90.00 | Other | 1.8% |
| 8424.90 | Parts: | |
| 8424.90.05.00 | Of fire extinguishers | Free |
| 8424.90.10.00 | Of simple piston pump sprays and powder bellows | 2.9% |
| 8424.90.20.00 | Of sand blasting machines | Free |
| 8424.90.90 | Other | Free |
| 8424.90.90.40 | Of steam and similar jet projecting machines | |
| 8424.90.90.80 | Other | |
| 8425 | Pulley tackle and hoists other than skip hoists; winches and capstans; jacks: | |
| 8425.11.00.00 | Powered by electric motor | Free |
| 8425.19.00.00 | Other | Free |
| 8425.31.01.00 | Powered by electric motor | Free |
| 8425.39.01.00 | Other | Free |
| 8425.41.00.00 | Built-in jacking systems of a type used in garages | Free |
| 8425.42.00.00 | Other jacks and hoists, hydraulic | Free |
| 8425.49.00.00 | Other | Free |
| 8426 | Ships' derricks; cranes, including cable cranes; mobile lifting frames, straddle carriers and works trucks fitted with a crane: | |
| 8426.11.00.00 | Overhead traveling cranes on fixed support | Free |
| 8426.12.00.00 | Mobile lifting frames on tires and straddle carriers | Free |
| 8426.19.00.00 | Other | Free |
| 8426.20.00.00 | Tower cranes | Free |
| 8426.30.00.00 | Portal or pedestal jib cranes | Free |
| 8426.41.00 | On tires | Free |
| 8426.41.00.05 | Works trucks fitted with a crane | |
| 8426.41.00.10 | Cable operated | |
| 8426.41.00.90 | Other | |
| 8426.49.00 | Other | Free |
| 8426.49.00.10 | Cable operated | |
| 8426.49.00.90 | Other | |
| 8426.91.00.00 | Designed for mounting on road vehicles | Free |
| 8426.99.00.00 | Other | Free |
| 8427 | Fork-lift trucks; other works trucks fitted with lifting or handling equipment: | |
| 8427.10 | Self-propelled trucks powered by an electric motor: | |
| 8427.10.40.00 | Rider-type, counterbalanced fork-lift trucks | Free |
| 8427.10.80 | Other | Free |
| 8427.10.80.20 | Aerial work platforms of a kind described in statistical note 4 to this chapter | |
| 8427.10.80.30 | Other | |
| 8427.10.80.40 | Aerial work platforms of a kind described in statistical note 4 to this chapter | |
| 8427.10.80.50 | Other | |
| 8427.10.80.70 | Aerial work platforms of a kind described in statistical note 4 to this chapter | |
| 8427.10.80.95 | Other | |
| 8427.20 | Other self-propelled trucks: | |
| 8427.20.40.00 | Rider-type, counterbalanced fork-lift trucks | Free |
| 8427.20.80 | Other | Free |
| 8427.20.80.20 | Aerial work platforms of a kind described in statistical note 4 to this chapter | |
| 8427.20.80.90 | Other | |
| 8427.90.00 | Other trucks | Free |
| 8427.90.00.20 | Aerial work platforms of a kind described in statistical note 4 to this chapter | |
| 8427.90.00.90 | Other | |
| 8428 | Other lifting, handling, loading or unloading machinery (for example, elevators, escalators, conveyors, teleferics): | |
| 8428.10.00.00 | Passenger or freight elevators other than continuous action; skip hoists | Free |
| 8428.20.00 | Pneumatic elevators and conveyors | Free |
| 8428.20.00.10 | Conveyors | |
| 8428.20.00.50 | Elevators | |
| 8428.31.00.00 | Specially designed for underground use | Free |
| 8428.32.00.00 | Other, bucket type | Free |
| 8428.33.00.00 | Other, belt type | Free |
| 8428.39.00.00 | Other | Free |
| 8428.40.00.00 | Escalators and moving walkways | Free |
| 8428.60.00.00 | Teleferics, chair lifts, ski draglines; traction mechanisms for funiculars | Free |
| 8428.70.00.00 | Industrial robots | Free |
| 8428.90.03 | Other machinery | Free |
| 8428.90.03.10 | Woodland log handling equipment (other than skidders) | |
| 8428.90.03.90 | Other | |
| 8429 | Self-propelled bulldozers, angledozers, graders, levelers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and road rollers: | |
| 8429.11.00 | Track laying | Free |
| 8429.11.00.10 | New | |
| 8429.11.00.90 | Used or rebuilt | |
| 8429.19.00 | Other | Free |
| 8429.19.00.10 | New | |
| 8429.19.00.90 | Used or rebuilt | |
| 8429.20.00.00 | Graders and levelers | Free |
| 8429.30.00 | Scrapers | Free |
| 8429.30.00.20 | Not exceeding <il>13.7 m<sup>3</sup></il> | |
| 8429.30.00.40 | Exceeding <il>13.7 m<sup>3</sup></il> | |
| 8429.30.00.60 | Used or rebuilt | |
| 8429.40.00 | Tamping machines and road rollers | Free |
| 8429.40.00.20 | Vibratory | |
| 8429.40.00.40 | Other | |
| 8429.40.00.60 | Used or rebuilt | |
| 8429.51 | Front-end shovel loaders: | |
| 8429.51.10 | Wheel-type | Free |
| 8429.51.10.05 | 2 wheel drive | |
| 8429.51.10.15 | Under <il>1.5 m<sup>3</sup></il> | |
| 8429.51.10.25 | At least <il>1.5 m<sup>3</sup></il> but under <il>2.2 m<sup>3</sup></il> | |
| 8429.51.10.30 | At least <il>2.2 m<sup>3</sup></il> but under <il>2.9 m<sup>3</sup></il> | |
| 8429.51.10.35 | At least <il>2.9 m<sup>3</sup></il> but under <il>3.8 m<sup>3</sup></il> | |
| 8429.51.10.40 | At least <il>3.8 m<sup>3</sup></il> but under <il>5.2 m<sup>3</sup></il> | |
| 8429.51.10.45 | At least <il>5.2 m<sup>3</sup></il> but under <il>7.6 m<sup>3</sup></il> | |
| 8429.51.10.50 | At least <il>7.6 m<sup>3</sup></il> but under <il>11.4 m<sup>3</sup></il> | |
| 8429.51.10.55 | <il>11.4 m<sup>3</sup></il> and over | |
| 8429.51.10.60 | Other | |
| 8429.51.10.65 | Used or rebuilt | |
| 8429.51.50 | Other | Free |
| 8429.51.50.10 | Less than <il>44.7 kW</il> | |
| 8429.51.50.20 | At least <il>44.7 kW</il> but under <il>67.1 kW</il> | |
| 8429.51.50.30 | At least <il>67.1 kW</il> but under <il>93.2 kW</il> | |
| 8429.51.50.40 | At least <il>93.2 kW</il> but under <il>119.3 kW</il> | |
| 8429.51.50.50 | <il>119.3 kW</il> and over | |
| 8429.51.50.60 | Used or rebuilt | |
| 8429.52 | Machinery with a 360˚ revolving superstructure: | |
| 8429.52.10 | Backhoes, shovels, clamshells and draglines | Free |
| 8429.52.10.10 | Hydraulic | |
| 8429.52.10.20 | Other | |
| 8429.52.10.30 | Hydraulic | |
| 8429.52.10.40 | Other | |
| 8429.52.10.50 | Used or rebuilt | |
| 8429.52.50 | Other | Free |
| 8429.52.50.10 | New | |
| 8429.52.50.90 | Used or rebuilt | |
| 8429.59 | Other: | |
| 8429.59.10 | Backhoes, shovels, clamshells and draglines | Free |
| 8429.59.10.30 | Backhoes | |
| 8429.59.10.60 | Other | |
| 8429.59.10.90 | Used or rebuilt | |
| 8429.59.50 | Other | Free |
| 8429.59.50.20 | Ladder type | |
| 8429.59.50.40 | Other | |
| 8429.59.50.60 | Other | |
| 8429.59.50.80 | Used or rebuilt | |
| 8430 | Other moving, grading, leveling, scraping, excavating, tamping, compacting, extracting or boring machinery, for earth, minerals or ores; pile-drivers and pile-extractors; snowplows and snowblowers: | |
| 8430.10.00.00 | Pile-drivers and pile-extractors | Free |
| 8430.20.00 | Snowplows and snowblowers | Free |
| 8430.20.00.30 | Attachment type | |
| 8430.20.00.60 | Other | |
| 8430.20.00.90 | Other | |
| 8430.31.00 | Self-propelled | Free |
| 8430.31.00.40 | Rock breaking machines | |
| 8430.31.00.80 | Other | |
| 8430.39.00 | Other | Free |
| 8430.39.00.40 | Rock breaking machines | |
| 8430.39.00.80 | Other | |
| 8430.41.00.00 | Self-propelled | Free |
| 8430.49 | Other: | |
| 8430.49.40.00 | Offshore oil and natural gas drilling and production platforms | Free |
| 8430.49.80 | Other | Free |
| 8430.49.80.10 | Rotary | |
| 8430.49.80.20 | Other | |
| 8430.49.80.30 | Rotary | |
| 8430.49.80.40 | Other | |
| 8430.49.80.50 | Other | |
| 8430.50 | Other machinery, self-propelled: | |
| 8430.50.10.00 | Peat excavators | Free |
| 8430.50.50.00 | Other | Free |
| 8430.61.00.00 | Tamping or compacting machinery | Free |
| 8430.69.01.00 | Other | Free |
| 8431 | Parts suitable for use solely or principally with the machinery of headings 8425 to 8430: | |
| 8431.10.00 | Of machinery of heading 8425 | Free |
| 8431.10.00.10 | Of machinery of subheading 8425.11 or 8425.19 | |
| 8431.10.00.90 | Other | |
| 8431.20.00.00 | Of machinery of heading 8427 | Free |
| 8431.31.00 | Of passenger or freight elevators other than continuous action, skip hoists or escalators | Free |
| 8431.31.00.20 | Of skip hoists | |
| 8431.31.00.40 | Of escalators | |
| 8431.31.00.60 | Other | |
| 8431.39.00 | Other | Free |
| 8431.39.00.10 | Of elevators and conveyors | |
| 8431.39.00.50 | Of oil and gas field machinery | |
| 8431.39.00.70 | Of the woodland log handling equipment of statistical reporting number 8428.90.0310 | |
| 8431.39.00.80 | Other | |
| 8431.41.00 | Buckets, shovels, grabs and grips | Free |
| 8431.41.00.20 | Shovel attachments | |
| 8431.41.00.40 | Clamshell (grappler) attachments | |
| 8431.41.00.60 | Dragline buckets | |
| 8431.41.00.80 | Other | |
| 8431.42.00.00 | Bulldozer or angledozer blades | Free |
| 8431.43 | Parts for boring or sinking machinery of subheading 8430.41 or 8430.49: | |
| 8431.43.40.00 | Of offshore oil and natural gas drilling and production platforms | Free |
| 8431.43.80 | Other | Free |
| 8431.43.80.20 | Tool joints, whether or not forged | |
| 8431.43.80.40 | Drill pipe fitted with tool joints | |
| 8431.43.80.60 | Other | |
| 8431.43.80.90 | Of other boring or sinking machinery | |
| 8431.49 | Other: | |
| 8431.49.10 | Of machinery of heading 8426 | Free |
| 8431.49.10.10 | Of machinery of subheadings 8426.11, 8426.19 and 8426.30 | |
| 8431.49.10.60 | Of mobile lifting frames, straddle carriers and works trucks fitted with a crane | |
| 8431.49.10.70 | Of copper or copper alloys | |
| 8431.49.10.80 | Other | |
| 8431.49.90 | Other | Free |
| 8431.49.90.05 | Backhoe attachments | |
| 8431.49.90.10 | Front-end loader attachments | |
| 8431.49.90.15 | Rippers and rooters | |
| 8431.49.90.20 | Other | |
| 8431.49.90.25 | Cast axle housings | |
| 8431.49.90.32 | Of copper or copper alloys | |
| 8431.49.90.34 | Other | |
| 8431.49.90.35 | Cast axle housings | |
| 8431.49.90.36 | Road wheels | |
| 8431.49.90.38 | Wheel and tire assemblies | |
| 8431.49.90.39 | Of copper or copper alloys | |
| 8431.49.90.41 | Other | |
| 8431.49.90.45 | Scraper bowls for scrapers of subheadings 8429.30 and 8430.69.01 | |
| 8431.49.90.50 | Track links | |
| 8431.49.90.55 | Cast axle housings | |
| 8431.49.90.81 | Steel forgings | |
| 8431.49.90.84 | Road wheels | |
| 8431.49.90.90 | Wheel and tire assemblies | |
| 8431.49.90.92 | Of copper or copper alloys | |
| 8431.49.90.94 | Other | |
| 8432 | Agricultural, horticultural or forestry machinery for soil preparation or cultivation; lawn or sports ground rollers; parts thereof: | |
| 8432.10.00 | Plows | Free |
| 8432.10.00.20 | Moldboard plows except listers | |
| 8432.10.00.40 | Disc plows | |
| 8432.10.00.60 | Other | |
| 8432.21.00.00 | Disc harrows | Free |
| 8432.29.00 | Other | Free |
| 8432.29.00.40 | Cultivators, tractor drawn or for tractor mounting | |
| 8432.29.00.60 | Walk behind rotary tillers | |
| 8432.29.00.80 | Other | |
| 8432.29.00.90 | Other | |
| 8432.31.00 | No-till direct seeders, planters and transplanters | Free |
| 8432.31.00.10 | Planters and transplanters | |
| 8432.31.00.90 | Seeders | |
| 8432.39.00 | Other | Free |
| 8432.39.00.10 | Planters and transplanters | |
| 8432.39.00.90 | Seeders | |
| 8432.41.00.00 | Manure spreaders | Free |
| 8432.42.00.00 | Fertilizer distributors | Free |
| 8432.80.00 | Other machinery | Free |
| 8432.80.00.10 | Tow behind spreaders, aerators, and de- thatchers | |
| 8432.80.00.80 | Other | |
| 8432.90.00 | Parts | Free |
| 8432.90.00.10 | Road wheels without tires | |
| 8432.90.00.20 | Wheel and tire assemblies | |
| 8432.90.00.40 | Of plows | |
| 8432.90.00.50 | Of harrows, scarifiers, cultivators, weeders and hoes | |
| 8432.90.00.60 | Of seeders, planters, transplanters, manure spreaders and fertilizer distributors | |
| 8432.90.00.81 | Of other machinery | |
| 8433 | Harvesting or threshing machinery, including straw or fodder balers; grass or hay mowers; machines for cleaning, sorting or grading eggs, fruit or other agricultural produce, other than machinery of heading 8437; parts thereof: | |
| 8433.11.00 | Powered, with the cutting device rotating in a horizontal plane | Free |
| 8433.11.00.10 | Electric mowers, including battery operated | |
| 8433.11.00.20 | Under <il>5.2 kW</il> | |
| 8433.11.00.30 | <il>5.2 kW</il> and over but under <il>7.46 kW</il> | |
| 8433.11.00.40 | <il>7.46 kW</il> and over | |
| 8433.11.00.50 | Under <il>3.7 kW</il> | |
| 8433.11.00.60 | <il>3.7 kW</il> and over | |
| 8433.19.00 | Other | Free |
| 8433.19.00.10 | Greens mowers | |
| 8433.19.00.20 | Gang cutting units | |
| 8433.19.00.30 | Other riding mowers | |
| 8433.19.00.40 | Gasoline powered | |
| 8433.19.00.50 | Other | |
| 8433.20.00 | Other mowers, including cutter bars for tractor mounting | Free |
| 8433.20.00.20 | Rotary cutter type | |
| 8433.20.00.40 | Other | |
| 8433.20.00.60 | Other | |
| 8433.30.00.00 | Other haymaking machinery | Free |
| 8433.40.00.00 | Straw or fodder balers, including pick-up balers | Free |
| 8433.51.00 | Combine harvester-threshers | Free |
| 8433.51.00.10 | Self-propelled | |
| 8433.51.00.90 | Other | |
| 8433.52.00.00 | Other threshing machinery | Free |
| 8433.53.00.00 | Root or tuber harvesting machines | Free |
| 8433.59.00 | Other | Free |
| 8433.59.00.10 | Field forage harvesters | |
| 8433.59.00.90 | Other | |
| 8433.60.00 | Machines for cleaning, sorting or grading eggs, fruit or other agricultural produce | Free |
| 8433.60.00.10 | Machines for cleaning, sorting or grading eggs | |
| 8433.60.00.90 | Other | |
| 8433.90 | Parts: | |
| 8433.90.10 | Of mowers for lawns, parks or sports grounds | Free |
| 8433.90.10.10 | Wheel and tire assemblies | |
| 8433.90.10.90 | Other | |
| 8433.90.50 | Other | Free |
| 8433.90.50.10 | Road wheels | |
| 8433.90.50.25 | Of haying machines and balers | |
| 8433.90.50.45 | Other | |
| 8433.90.50.60 | Of machines for cleaning, sorting or grading eggs | |
| 8433.90.50.80 | Of machines for cleaning, sorting or grading fruit or other agricultural produce | |
| 8434 | Milking machines and dairy machinery, and parts thereof: | |
| 8434.10.00.00 | Milking machines | Free |
| 8434.20.00.00 | Dairy machinery | Free |
| 8434.90.00.00 | Parts | Free |
| 8435 | Presses, crushers and similar machinery, used in the manufacture of wine, cider, fruit juices or similar beverages; parts thereof: | |
| 8435.10.00.00 | Machinery | Free |
| 8435.90.00.00 | Parts | Free |
| 8436 | Other agricultural, horticultural, forestry, poultry-keeping or bee-keeping machinery, including germination plant fitted with mechanical or thermal equipment; poultry incubators and brooders; parts thereof: | |
| 8436.10.00.00 | Machinery for preparing animal feeds | Free |
| 8436.21.00.00 | Poultry incubators and brooders | Free |
| 8436.29.00.00 | Other | Free |
| 8436.80.00 | Other machinery | Free |
| 8436.80.00.20 | Forestry machinery | |
| 8436.80.00.40 | Barn and barnyard machines | |
| 8436.80.00.60 | Machines for preparing crops for market or for use | |
| 8436.80.00.70 | Bee-keeping machinery | |
| 8436.80.00.90 | Other | |
| 8436.91.00 | Of poultry-keeping machinery or poultry incubators and brooders | Free |
| 8436.91.00.40 | Of poultry incubators and brooders | |
| 8436.91.00.80 | Other | |
| 8436.99.00 | Other | Free |
| 8436.99.00.20 | Of forestry machinery | |
| 8436.99.00.30 | Of bee-keeping machinery | |
| 8436.99.00.35 | Of machinery for preparing animal feeds | |
| 8436.99.00.40 | Of barn or barnyard machines | |
| 8436.99.00.70 | Of machines for preparing crops for market or for use | |
| 8436.99.00.90 | Other | |
| 8437 | Machines for cleaning, sorting or grading seed, grain or dried leguminous vegetables, and parts thereof; machinery used in the milling industry or for the working of cereals or dried leguminous vegetables, other than farm type machinery; parts thereof: | |
| 8437.10.00.00 | Machines for cleaning, sorting or grading seed, grain or dried leguminous vegetables | Free |
| 8437.80.00 | Other machinery | Free |
| 8437.80.00.10 | Flour mill and grain mill machines | |
| 8437.80.00.90 | Other | |
| 8437.90.00 | Parts | Free |
| 8437.90.00.10 | Of flour mill or grain mill machines | |
| 8437.90.00.90 | Other | |
| 8438 | Machinery, not specified or included elsewhere in this chapter, for the industrial preparation or manufacture of food or drink, other than machinery for the extraction or preparation of animal or fixed vegetable or microbial fats or oils; parts thereof: | |
| 8438.10.00 | Bakery machinery and machinery for the manufacture of macaroni, spaghetti or similar products | Free |
| 8438.10.00.10 | Bakery machinery | |
| 8438.10.00.90 | Other | |
| 8438.20.00.00 | Machinery for the manufacture of confectionery, cocoa or chocolate | Free |
| 8438.30.00.00 | Machinery for sugar manufacture | Free |
| 8438.40.00.00 | Brewery machinery | 2.3% |
| 8438.50.00 | Machinery for the preparation of meat or poultry | 2.8% |
| 8438.50.00.10 | Meat- and poultry-packing plant machinery | |
| 8438.50.00.90 | Other | |
| 8438.60.00.00 | Machinery for the preparation of fruits, nuts or vegetables | Free |
| 8438.80.00.00 | Other machinery | Free |
| 8438.90 | Parts: | |
| 8438.90.10.00 | Of machinery for sugar manufacture | Free |
| 8438.90.90 | Other | 2.8% |
| 8438.90.90.15 | Of bakery machinery and machinery for the manufacture of macaroni, spaghetti or similar products | |
| 8438.90.90.30 | Of machinery for the manufacture of confectionery, cocoa or chocolate | |
| 8438.90.90.60 | Of machinery for the preparation of meat or poultry | |
| 8438.90.90.90 | Other | |
| 8439 | Machinery for making pulp of fibrous cellulosic material or for making or finishing paper or paperboard (other than the machinery of heading 8419); parts thereof: | |
| 8439.10.00 | Machinery for making pulp of fibrous cellulosic material | Free |
| 8439.10.00.10 | New | |
| 8439.10.00.90 | Used or rebuilt | |
| 8439.20.00 | Machinery for making paper or paperboard | Free |
| 8439.20.00.10 | New | |
| 8439.20.00.90 | Used or rebuilt | |
| 8439.30.00.00 | Machinery for finishing paper or paperboard | Free |
| 8439.91 | Of machinery for making pulp of fibrous cellulosic materials: | |
| 8439.91.10.00 | Bed plates, roll bars and other stock-treating parts | Free |
| 8439.91.90.00 | Other | Free |
| 8439.99 | Other: | |
| 8439.99.10.00 | Of machinery for making paper or paperboard | Free |
| 8439.99.50.00 | Of machinery for finishing paper or paperboard | Free |
| 8440 | Bookbinding machinery, including book-sewing machines, and parts thereof: | |
| 8440.10.00.00 | Machinery | Free |
| 8440.90.00.00 | Parts | Free |
| 8441 | Other machinery for making up paper pulp, paper or paperboard, including cutting machines of all kinds, and parts thereof: | |
| 8441.10.00.00 | Cutting machines | Free |
| 8441.20.00.00 | Machines for making bags, sacks or envelopes | Free |
| 8441.30.00.00 | Machines for making cartons, boxes, cases, tubes, drums or similar containers, other than by molding | Free |
| 8441.40.00.00 | Machines for molding articles in paper pulp, paper or paperboard | Free |
| 8441.80.00.00 | Other machinery | Free |
| 8441.90.00.00 | Parts | Free |
| 8442 | Machinery, apparatus and equipment (other than the machines of headings 8456 to 8465), for preparing or making plates, cylinders or other printing components; plates, cylinders and other printing components; plates, cylinders and lithographic stones, prepared for printing purposes (for example, planed, grained or polished); parts thereof: | |
| 8442.30.01 | Machinery, apparatus and equipment | Free |
| 8442.30.01.10 | Phototypesetting and composing machines | |
| 8442.30.01.50 | Other machinery, apparatus and equipment | |
| 8442.40.00.00 | Parts of the foregoing machinery, apparatus or equipment | Free |
| 8442.50 | Plates, cylinders and other printing components; plates, cylinders and lithographic stones, prepared for printing purposes (for example, planed, grained or polished): | |
| 8442.50.10.00 | Plates | Free |
| 8442.50.90.00 | Other | Free |
| 8443 | Printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442; other printers, copying machines and facsimile machines, whether or not combined; parts and accessories thereof: | |
| 8443.11 | Offset printing machinery, reel-fed: | |
| 8443.11.10.00 | Double-width newspaper printing presses | 3.3% |
| 8443.11.50.00 | Other | Free |
| 8443.12.00.00 | Offset printing machinery, sheet-fed, office type (using sheets with one side not exceeding <il>22 cm</il> and the other side not exceeding <il>36 cm</il> in the unfolded state) | Free |
| 8443.13.00.00 | Other offset printing machinery | Free |
| 8443.14.00.00 | Letterpress printing machinery, reel fed, excluding flexographic printing | 2.2% |
| 8443.15.00.00 | Letterpress printing machinery, other than reel fed, excluding flexographic printing | Free |
| 8443.16.00.00 | Flexographic printing machinery | 2.2% |
| 8443.17.00.00 | Gravure printing machinery | 2.2% |
| 8443.19 | Other: | |
| 8443.19.20.00 | Textile printing machinery | 2.6% |
| 8443.19.30.00 | Other | Free |
| 8443.31.00.00 | Machines which perform two or more of the functions of printing, copying or facsimile transmission, capable of connecting to an automatic data processing machine or to a network | Free |
| 8443.32 | Other, capable of connecting to an automatic data processing machine or to a network: | |
| 8443.32.10 | Printer units | Free |
| 8443.32.10.10 | Capable of producing more than 20 pages per minute | |
| 8443.32.10.20 | Other | |
| 8443.32.10.30 | Light bar electronic type | |
| 8443.32.10.40 | Ink jet | |
| 8443.32.10.50 | Thermal transfer | |
| 8443.32.10.60 | Ionographic | |
| 8443.32.10.70 | Daisy wheel | |
| 8443.32.10.80 | Dot matrix | |
| 8443.32.10.90 | Other | |
| 8443.32.50.00 | Other | Free |
| 8443.39 | Other: | |
| 8443.39.10.00 | Operating by reproducing the original image directly onto the copy (direct process) | Free |
| 8443.39.20.00 | Operating by reproducing the original image via an intermediate onto the copy (indirect process) | Free |
| 8443.39.30.00 | Incorporating an optical system | Free |
| 8443.39.40.00 | Of the contact type | Free |
| 8443.39.50.00 | Thermocopying apparatus | Free |
| 8443.39.60.00 | Other | Free |
| 8443.39.90.00 | Other | Free |
| 8443.91 | Parts and accessories of printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442: | |
| 8443.91.10.00 | Machines for uses ancillary to printing | Free |
| 8443.91.20.00 | Parts for textile printing machinery | Free |
| 8443.91.30.00 | Other | Free |
| 8443.99 | Other: | |
| 8443.99.10.00 | Accessory and auxiliary machines which are intended for attachment to an electrostatic photocopier and which do not operate independently of such photocopier | Free |
| 8443.99.20 | Parts of printer units of subheading 8443.32.10 specified in additional U.S. note 2 to this chapter | Free |
| 8443.99.20.10 | Ink cartridges | |
| 8443.99.20.50 | Other | |
| 8443.99.25 | Other | Free |
| 8443.99.25.10 | Ink cartridges | |
| 8443.99.25.50 | Other | |
| 8443.99.30.00 | Parts of facsimile machines specified in additional U.S. note 3 to this chapter | Free |
| 8443.99.35.00 | Other | Free |
| 8443.99.40.00 | Parts of photocopying apparatus of subheading 8443.39.20 specified in additional U.S. note 4 to this chapter | Free |
| 8443.99.45.00 | Other | Free |
| 8443.99.50 | Other | Free |
| 8443.99.50.11 | Ink cartridges | |
| 8443.99.50.15 | Other | |
| 8443.99.50.50 | Other | |
| 8444.00.00 | Machines for extruding, drawing, texturing or cutting man-made textile materials | Free |
| 8444.00.00.10 | Texturing machines | |
| 8444.00.00.90 | Other | |
| 8445 | Machines for preparing textile fibers; spinning, doubling or twisting machines and other machinery for producing textile yarns; textile reeling or winding (including weft winding) machines and machines for preparing textile yarns for use on the machines of heading 8446 or 8447: | |
| 8445.11.00.00 | Carding machines | Free |
| 8445.12.00.00 | Combing machines | Free |
| 8445.13.00.00 | Drawing or roving machines | Free |
| 8445.19.00 | Other | 3.3% |
| 8445.19.00.40 | Cotton gins | |
| 8445.19.00.80 | Other | |
| 8445.20.00.00 | Textile spinning machines | Free |
| 8445.30.00 | Textile doubling or twisting machines | Free |
| 8445.30.00.10 | Textile twisting machines | |
| 8445.30.00.90 | Other | |
| 8445.40.00.00 | Textile winding (including weft winding) or reeling machines | 3.7% |
| 8445.90.00.00 | Other | 3.7% |
| 8446 | Weaving machines (looms): | |
| 8446.10.00 | For weaving fabrics of a width not exceeding <il>30 cm</il> | Free |
| 8446.10.00.10 | Power looms | |
| 8446.10.00.90 | Other | |
| 8446.21 | Power looms: | |
| 8446.21.10.00 | For weaving fabrics of a width exceeding 4.9 m | Free |
| 8446.21.50.00 | Other | 3.7% |
| 8446.29.00.00 | Other | Free |
| 8446.30 | For weaving fabrics of a width exceeding <il>30 cm</il>, shuttleless type: | |
| 8446.30.10 | Power looms for weaving fabrics of a width exceeding <il>4.9 m</il> | Free |
| 8446.30.10.10 | Rapier type | |
| 8446.30.10.20 | Jet type | |
| 8446.30.10.30 | Other | |
| 8446.30.50 | Other | 3.7% |
| 8446.30.50.10 | Rapier type | |
| 8446.30.50.20 | Jet type | |
| 8446.30.50.30 | Other | |
| 8447 | Knitting machines, stitch-bonding machines and machines for making gimped yarn, tulle, lace, embroidery, trimmings, braid or net and machines for tufting: | |
| 8447.11 | With cylinder diameter not exceeding <il>165 mm:</il> | |
| 8447.11.10.00 | For knitting hosiery | Free |
| 8447.11.90 | Other | Free |
| 8447.11.90.10 | Open-top cylinder machines | |
| 8447.11.90.20 | Cylinder and dial machines | |
| 8447.11.90.90 | Other | |
| 8447.12 | With cylinder diameter exceeding <il>165 mm:</il> | |
| 8447.12.10.00 | For knitting hosiery | Free |
| 8447.12.90 | Other | Free |
| 8447.12.90.10 | Open-top cylinder machines | |
| 8447.12.90.20 | Cylinder and dial machines | |
| 8447.12.90.90 | Other | |
| 8447.20 | Flat knitting machines; stitch-bonding machines: | |
| 8447.20.20.00 | Power driven flat knitting machines over <il>50.8 cm</il> in width | Free |
| 8447.20.30.00 | Other | 2.6% |
| 8447.20.40.00 | Warp knitting machines | Free |
| 8447.20.60.00 | Other | Free |
| 8447.90 | Other: | |
| 8447.90.10.00 | Braiding and lace-braiding machines | Free |
| 8447.90.50.00 | Embroidery machines | Free |
| 8447.90.90.00 | Other | Free |
| 8448 | Auxiliary machinery for use with machines of heading 8444, 8445, 8446 or 8447 (for example, dobbies, Jacquards, automatic stop motions and shuttle changing mechanisms); parts and accessories suitable for use solely or principally with the machines of this heading or of heading 8444, 8445, 8446 or 8447 (for example, spindles and spindle flyers, card clothing, combs, extruding nipples, shuttles, healds and heald-frames, hosiery needles): | |
| 8448.11.00.00 | Dobbies and Jacquards; card reducing, copying, punching or assembling machines for use therewith | Free |
| 8448.19.00.00 | Other | Free |
| 8448.20 | Parts and accessories of machines of heading 8444 or of their auxiliary machinery: | |
| 8448.20.10.00 | Of machines for extruding or drawing man-made textile filaments | 3.7% |
| 8448.20.50 | Other | 3.3% |
| 8448.20.50.10 | Of texturing machines | |
| 8448.20.50.90 | Other | |
| 8448.31.00.00 | Card clothing | 3.3% |
| 8448.32.00 | Of machines for preparing textile fibers, other than card clothing | Free |
| 8448.32.00.10 | Of cotton gins | |
| 8448.32.00.90 | Other | |
| 8448.33.00.00 | Spindles, spindle flyers, spinning rings and ring travellers | 3.3% |
| 8448.39 | Other: | |
| 8448.39.10.00 | Parts of spinning, doubling or twisting machines | Free |
| 8448.39.50.00 | Parts of winding or reeling machines | 3.7% |
| 8448.39.90.00 | Other | Free |
| 8448.42.00.00 | Reeds for looms, healds and heald-frames | 3.7% |
| 8448.49 | Other: | |
| 8448.49.10.00 | Shuttles | 3.7% |
| 8448.49.20.00 | Other | Free |
| 8448.51 | Sinkers, needles and other articles used in forming stitches: | |
| 8448.51.10.00 | Latch needles | Free |
| 8448.51.20.00 | Spring-beard needles | Free |
| 8448.51.30.00 | Other | Free |
| 8448.51.50.00 | Other | Free |
| 8448.59 | Other: | |
| 8448.59.10.00 | Parts of knitting machines | Free |
| 8448.59.50.00 | Other | Free |
| 8449.00 | Machinery for the manufacture or finishing of felt or nonwovens in the piece or in shapes, including machinery for making felt hats; blocks for making hats; parts thereof: | |
| 8449.00.10.00 | Finishing machinery and parts thereof | 2.6% |
| 8449.00.50.00 | Other | Free |
| 8450 | Household- or laundry-type washing machines, including machines which both wash and dry; parts thereof: | |
| 8450.11.00 | Fully automatic machines | 1.4% |
| 8450.11.00.10 | Coin operated | |
| 8450.11.00.40 | Top Loading | |
| 8450.11.00.80 | Other | |
| 8450.12.00.00 | Other machines with built-in centrifugal dryer | 2.6% |
| 8450.19.00.00 | Other | 1.8% |
| 8450.20.00 | Machines, each of a dry linen capacity exceeding <il>10 kg</il> | 1% |
| 8450.20.00.10 | Coin operated | |
| 8450.20.00.40 | Top Loading | |
| 8450.20.00.80 | Other | |
| 8450.90 | Parts: | |
| 8450.90.20.00 | Tubs and tub assemblies | 2.6% |
| 8450.90.40.00 | Furniture designed to receive the machines of subheadings 8450.11 through 8450.20, inclusive | 2.6% |
| 8450.90.60.00 | Other | 2.6% |
| 8451 | Machinery (other than machines of heading 8450) for washing, cleaning, wringing, drying, ironing, pressing (including fusing presses), bleaching, dyeing, dressing, finishing, coating or impregnating textile yarns, fabrics or made up textile articles and machines for applying the paste to the base fabric or other support used in the manufacture of floor coverings such as linoleum; machines for reeling, unreeling, folding, cutting or pinking textile fabrics; parts thereof: | |
| 8451.10.00.00 | Dry-cleaning machines | Free |
| 8451.21.00 | Each of a dry linen capacity not exceeding <il>10 kg</il> | 3.4% |
| 8451.21.00.10 | Coin operated | |
| 8451.21.00.90 | Other | |
| 8451.29.00 | Other | 2.6% |
| 8451.29.00.10 | For drying made up articles | |
| 8451.29.00.90 | Other | |
| 8451.30.00.00 | Ironing machines and presses (including fusing presses) | Free |
| 8451.40.00.00 | Washing, bleaching or dyeing machines | 3.5% |
| 8451.50.00.00 | Machines for reeling, unreeling, folding, cutting or pinking textile fabrics | Free |
| 8451.80.00.00 | Other machinery | 3.5% |
| 8451.90 | Parts: | |
| 8451.90.30.00 | Drying chambers for the drying machines of subheading 8451.21 or 8451.29, and other parts of drying machines incorporating drying chambers | 3.5% |
| 8451.90.60.00 | Furniture designed to receive the drying machines of subheading 8451.21 or 8451.29 | 3.5% |
| 8451.90.90 | Other | 3.5% |
| 8451.90.90.10 | Of machines for washing, dry-cleaning, ironing, pressing or drying made up textile articles or of other household or laundry type machines | |
| 8451.90.90.20 | Of machines for bleaching, dyeing, washing or cleaning | |
| 8451.90.90.90 | Other | |
| 8452 | Sewing machines, other than book-sewing machines of heading 8440; furniture, bases and covers specially designed for sewing machines; sewing machine needles; parts thereof: | |
| 8452.10.00 | Sewing machines of the household type | Free |
| 8452.10.00.10 | Valued not over $20 each | |
| 8452.10.00.90 | Other | |
| 8452.21 | Automatic units: | |
| 8452.21.10.00 | Specially designed to join footwear soles to uppers | Free |
| 8452.21.90.00 | Other | Free |
| 8452.29 | Other: | |
| 8452.29.10.00 | Specially designed to join footwear soles to uppers | Free |
| 8452.29.90.00 | Other | Free |
| 8452.30.00.00 | Sewing machine needles | Free |
| 8452.90 | Furniture, bases and covers for sewing machines, and parts thereof; other parts of sewing machines: | |
| 8452.90.10.00 | Furniture, bases and covers for sewing machines, and parts thereof | 2.5% |
| 8452.90.20 | Other parts of sewing machines | Free |
| 8452.90.20.10 | Of household machines | |
| 8452.90.20.90 | Other | |
| 8453 | Machinery for preparing, tanning or working hides, skins or leather or for making or repairing footwear or other articles of hides, skins or leather, other than sewing machines; parts thereof: | |
| 8453.10.00.00 | Machinery for preparing, tanning or working hides, skins or leather | Free |
| 8453.20.00.00 | Machinery for making or repairing footwear | Free |
| 8453.80.00.00 | Other machinery | Free |
| 8453.90 | Parts: | |
| 8453.90.10.00 | Of machinery for making or repairing footwear | Free |
| 8453.90.50.00 | Other | Free |
| 8454 | Converters, ladles, ingot molds and casting machines, of a kind used in metallurgy or in metal foundries, and parts thereof: | |
| 8454.10.00.00 | Converters | Free |
| 8454.20.00 | Ingot molds and ladles | Free |
| 8454.20.00.10 | For steel ingots | |
| 8454.20.00.60 | Other | |
| 8454.20.00.80 | Ladles | |
| 8454.30.00 | Casting machines | Free |
| 8454.30.00.10 | Die casting machines | |
| 8454.30.00.90 | Other | |
| 8454.90.00 | Parts | Free |
| 8454.90.00.30 | Of die casting machines | |
| 8454.90.00.60 | Other | |
| 8454.90.00.70 | Of ingot molds | |
| 8454.90.00.80 | Other | |
| 8455 | Metal-rolling mills and rolls therefor; parts thereof: | |
| 8455.10.00.00 | Tube mills | Free |
| 8455.21.00.00 | Hot or combination hot and cold | Free |
| 8455.22.00.00 | Cold | Free |
| 8455.30.00 | Rolls for rolling mills | Free |
| 8455.30.00.05 | Not exceeding <il>2,268 kg</il> | |
| 8455.30.00.15 | Exceeding <il>2,268 kg</il> but not exceeding <il>6,803.9 kg</il> | |
| 8455.30.00.25 | Exceeding <il>6,803.9 kg</il> | |
| 8455.30.00.35 | Not exceeding <il>2,268 kg</il> | |
| 8455.30.00.45 | Exceeding <il>2,268 kg</il> but not exceeding <il>6,803.9 kg</il> | |
| 8455.30.00.55 | Exceeding <il>6,803.9 kg</il> | |
| 8455.30.00.65 | Not exceeding <il>2,268 kg</il> | |
| 8455.30.00.75 | Exceeding <il>2,268 kg</il> but not exceeding <il>6,803.9 kg</il> | |
| 8455.30.00.85 | Exceeding <il>6,803.9 kg</il> | |
| 8455.90 | Other parts: | |
| 8455.90.40.00 | Castings or weldments, individually weighing less than <il>90 tons</il>, for the machines of heading 8455 | Free |
| 8455.90.80.00 | Other | Free |
| 8456 | Machine tools for working any material by removal of material, by laser or other light or photon beam, ultrasonic, electro-discharge, electro-chemical, electron-beam, ionic-beam or plasma arc processes; water-jet cutting machines: | |
| 8456.11 | Operated by laser: | |
| 8456.11.10 | For working metal | 3.5% |
| 8456.11.10.10 | Numerically controlled | |
| 8456.11.10.50 | Other | |
| 8456.11.70.00 | Of a kind used solely or principally for the manufacture of printed circuits, printed circuit assemblies, parts of heading 8517 or parts of automatic data processing units | Free |
| 8456.11.90.00 | Other | 2.4% |
| 8456.12 | Operated by other light or photon beam processes: | |
| 8456.12.10 | For working metal | 3.5% |
| 8456.12.10.10 | Numerically controlled | |
| 8456.12.10.50 | Other | |
| 8456.12.70.00 | Of a kind used solely or principally for the manufacture of printed circuits, printed circuit assemblies, parts of heading 8517 or parts of automatic data processing | Free |
| 8456.12.90.00 | Other | 2.4% |
| 8456.20 | Operated by ultrasonic processes: | |
| 8456.20.10 | For working metal | 3.5% |
| 8456.20.10.10 | Numerically controlled | |
| 8456.20.10.50 | Other | |
| 8456.20.50.00 | Other | 2.4% |
| 8456.30 | Operated by electro-discharge processes: | |
| 8456.30.10 | For working metal | 3.5% |
| 8456.30.10.20 | Traveling wire (wire-cut) type | |
| 8456.30.10.50 | Numerically controlled | |
| 8456.30.10.70 | Other | |
| 8456.30.50.00 | Other | 2.4% |
| 8456.40 | Operated by plasma arc process: | |
| 8456.40.10 | For working metal | 3.5% |
| 8456.40.10.10 | Numerically controlled | |
| 8456.40.10.90 | Other | |
| 8456.40.90.00 | Other | 2.2% |
| 8456.50.00.00 | Water-jet cutting machines | 2.5% |
| 8456.90 | Other: | |
| 8456.90.31.00 | For working metal | 3.5% |
| 8456.90.71.00 | Other | 2.2% |
| 8457 | Machining centers, unit construction machines (single station) and multistation transfer machines, for working metal: | |
| 8457.10.00 | Machining centers | 4.2% |
| 8457.10.00.05 | Used or rebuilt | |
| 8457.10.00.15 | Not over <il>660 mm</il> | |
| 8457.10.00.25 | Over <il>660 mm</il> | |
| 8457.10.00.55 | Not over <il>685 mm</il> | |
| 8457.10.00.60 | Over <il>685 mm</il> but not over <il>1,016 mm</il> | |
| 8457.10.00.65 | Over <il>1,016 mm</il> | |
| 8457.10.00.70 | Other | |
| 8457.10.00.75 | Other | |
| 8457.20.00 | Unit construction machines (single station) | 3.3% |
| 8457.20.00.10 | Numerically controlled | |
| 8457.20.00.90 | Other | |
| 8457.30.00 | Multistation transfer machines | 3.3% |
| 8457.30.00.10 | Numerically controlled | |
| 8457.30.00.90 | Other | |
| 8458 | Lathes (including turning centers) for removing metal: | |
| 8458.11.00 | Numerically controlled | 4.4% |
| 8458.11.00.05 | Used or rebuilt | |
| 8458.11.00.10 | Multiple spindle | |
| 8458.11.00.30 | With a power rating of less than <il>18.65 kW</il> | |
| 8458.11.00.50 | With a power rating of <il>18.65 kW</il> or greater but not exceeding <il>37.3 kW</il> | |
| 8458.11.00.90 | With a power rating exceeding <il>37.3 kW</il> | |
| 8458.19.00 | Other | 4.4% |
| 8458.19.00.10 | Used or rebuilt | |
| 8458.19.00.20 | Other, valued under $3,025 each | |
| 8458.19.00.30 | Engine or toolroom lathes | |
| 8458.19.00.50 | Single spindle | |
| 8458.19.00.70 | Multiple spindle | |
| 8458.19.00.90 | Other | |
| 8458.91 | Numerically controlled: | |
| 8458.91.10 | Vertical turret lathes | 4.2% |
| 8458.91.10.40 | Used or rebuilt | |
| 8458.91.10.60 | Multiple spindle | |
| 8458.91.10.80 | Other | |
| 8458.91.50 | Other | 4.4% |
| 8458.91.50.40 | Used or rebuilt | |
| 8458.91.50.50 | Multiple spindle | |
| 8458.91.50.70 | Other | |
| 8458.99 | Other: | |
| 8458.99.10 | Vertical turret lathes | 4.2% |
| 8458.99.10.10 | Used or rebuilt | |
| 8458.99.10.50 | Other | |
| 8458.99.50 | Other | 4.4% |
| 8458.99.50.30 | Used or rebuilt | |
| 8458.99.50.60 | Other, valued under $3,025 each | |
| 8458.99.50.90 | Other | |
| 8459 | Machine tools (including way-type unit head machines) for drilling, boring, milling, threading or tapping by removing metal, other than lathes (including turning centers) of heading 8458: | |
| 8459.10.00.00 | Way-type unit head machines | 3.3% |
| 8459.21.00 | Numerically controlled | 4.2% |
| 8459.21.00.40 | Used or rebuilt | |
| 8459.21.00.80 | Other | |
| 8459.29.00 | Other | 4.2% |
| 8459.29.00.10 | Used or rebuilt | |
| 8459.29.00.20 | Other, valued under $3,025 each | |
| 8459.29.00.40 | Multiple spindle | |
| 8459.29.00.50 | Radial | |
| 8459.29.00.70 | Upright, excluding sensitive (hand- directed), turret and deep-hole machines | |
| 8459.29.00.90 | Other | |
| 8459.31.00 | Numerically controlled | 4.2% |
| 8459.31.00.05 | Used or rebuilt | |
| 8459.31.00.10 | Table type, excluding planer type | |
| 8459.31.00.40 | Other | |
| 8459.31.00.70 | Other | |
| 8459.39.00 | Other | 4.2% |
| 8459.39.00.10 | Used or rebuilt | |
| 8459.39.00.20 | Other, valued under $3,025 each | |
| 8459.39.00.40 | Horizontal spindle | |
| 8459.39.00.50 | Other | |
| 8459.41.00 | Numerically controlled | 4.2% |
| 8459.41.00.10 | Used or rebuilt | |
| 8459.41.00.20 | Other, valued under $3,025 each | |
| 8459.41.00.30 | Vertical | |
| 8459.41.00.90 | Other | |
| 8459.49.00 | Other | 4.2% |
| 8459.49.00.10 | Used or rebuilt | |
| 8459.49.00.20 | Other, valued under $3,025 each | |
| 8459.49.00.30 | Vertical | |
| 8459.49.00.90 | Other | |
| 8459.51.00 | Numerically controlled | 4.2% |
| 8459.51.00.40 | Used or rebuilt | |
| 8459.51.00.80 | Other | |
| 8459.59.00 | Other | 4.2% |
| 8459.59.00.10 | Used or rebuilt | |
| 8459.59.00.20 | Other, valued under $3,025 each | |
| 8459.59.00.30 | Other | |
| 8459.61.00 | Numerically controlled | 4.2% |
| 8459.61.00.40 | Used or rebuilt | |
| 8459.61.00.80 | Other | |
| 8459.69.00 | Other | 4.2% |
| 8459.69.00.10 | Used or rebuilt | |
| 8459.69.00.20 | Other, valued under $3,025 each | |
| 8459.69.00.50 | Profile, duplicating or die sinking | |
| 8459.69.00.70 | Bed type | |
| 8459.69.00.90 | Other | |
| 8459.70 | Other threading or tapping machines: | |
| 8459.70.40.00 | Numerically controlled | 4.2% |
| 8459.70.80 | Other | 4.2% |
| 8459.70.80.40 | Used or rebuilt | |
| 8459.70.80.60 | Other, valued under $3,025 each | |
| 8459.70.80.80 | Other | |
| 8460 | Machine tools for deburring, sharpening, grinding, honing, lapping, polishing or otherwise finishing metal or cermets by means of grinding stones, abrasives or polishing products, other than gear cutting, gear grinding or gear finishing machines of heading 8461: | |
| 8460.12.00 | Numerically controlled | 4.4% |
| 8460.12.00.40 | Used or rebuilt | |
| 8460.12.00.80 | Other | |
| 8460.19.01 | Other | 4.4% |
| 8460.19.01.05 | Used or rebuilt | |
| 8460.19.01.10 | Reciprocating-table type | |
| 8460.19.01.50 | Other | |
| 8460.22.00 | Centerless grinding machines, numerically controlled | 4.4% |
| 8460.22.00.40 | Used or rebuilt | |
| 8460.22.00.80 | Other | |
| 8460.23.00 | Other cylindrical grinding machines, numerically controlled | 4.4% |
| 8460.23.00.40 | Used or rebuilt | |
| 8460.23.00.55 | External cylindrical, including universal | |
| 8460.23.00.65 | Internal cylindrical | |
| 8460.23.00.75 | Other | |
| 8460.24.00 | Other, numerically controlled | 4.4% |
| 8460.24.00.05 | Used or rebuilt | |
| 8460.24.00.80 | Other | |
| 8460.29.01 | Other | 4.4% |
| 8460.29.01.05 | Used or rebuilt | |
| 8460.29.01.10 | External cylindrical, including universal | |
| 8460.29.01.30 | Internal cylindrical | |
| 8460.29.01.50 | Other | |
| 8460.31.00 | Numerically controlled | 4.4% |
| 8460.31.00.40 | Used or rebuilt | |
| 8460.31.00.80 | Other | |
| 8460.39.00 | Other | 4.4% |
| 8460.39.00.10 | Used or rebuilt | |
| 8460.39.00.20 | Other, valued under $3,025 each | |
| 8460.39.00.50 | Other | |
| 8460.40 | Honing or lapping machines: | |
| 8460.40.40 | Numerically controlled | 4.4% |
| 8460.40.40.10 | Used or rebuilt | |
| 8460.40.40.60 | Other | |
| 8460.40.80 | Other | 4.4% |
| 8460.40.80.10 | Used or rebuilt | |
| 8460.40.80.20 | Other, valued under $3,025 each | |
| 8460.40.80.80 | Other | |
| 8460.90 | Other: | |
| 8460.90.40 | Numerically controlled | 4.4% |
| 8460.90.40.10 | Used or rebuilt | |
| 8460.90.40.60 | Other | |
| 8460.90.80 | Other | 4.4% |
| 8460.90.80.10 | Used or rebuilt | |
| 8460.90.80.20 | Other, valued under $3,025 each | |
| 8460.90.80.80 | Other | |
| 8461 | Machine tools for planing, shaping, slotting, broaching, gear cutting, gear grinding or gear finishing, sawing, cutting-off and other machine tools working by removing metal or cermets, not elsewhere specified or included: | |
| 8461.20 | Shaping or slotting machines: | |
| 8461.20.40.00 | Numerically controlled | 4.4% |
| 8461.20.80 | Other | 4.4% |
| 8461.20.80.30 | Used or rebuilt | |
| 8461.20.80.70 | Other, valued under $3,025 each | |
| 8461.20.80.90 | Other | |
| 8461.30 | Broaching machines: | |
| 8461.30.40 | Numerically controlled | 4.4% |
| 8461.30.40.20 | Used or rebuilt | |
| 8461.30.40.60 | Other | |
| 8461.30.80 | Other | 4.4% |
| 8461.30.80.20 | Used or rebuilt | |
| 8461.30.80.40 | Other, valued under $3,025 each | |
| 8461.30.80.80 | Other | |
| 8461.40 | Gear cutting, gear grinding or gear finishing machines: | |
| 8461.40.10 | Gear cutting machines | 5.8% |
| 8461.40.10.10 | Used or rebuilt | |
| 8461.40.10.20 | For bevel gears | |
| 8461.40.10.30 | Gear hobbers | |
| 8461.40.10.40 | Gear shapers | |
| 8461.40.10.60 | Other | |
| 8461.40.50 | Gear grinding or finishing machines | 4.4% |
| 8461.40.50.20 | Used or rebuilt | |
| 8461.40.50.40 | Other, valued under $3,025 each | |
| 8461.40.50.50 | For bevel gears | |
| 8461.40.50.70 | Other | |
| 8461.50 | Sawing or cutting-off machines: | |
| 8461.50.40 | Numerically controlled | 4.4% |
| 8461.50.40.10 | Used or rebuilt | |
| 8461.50.40.50 | Other | |
| 8461.50.80 | Other | 4.4% |
| 8461.50.80.10 | Used or rebuilt | |
| 8461.50.80.20 | Other, valued under $3,025 each | |
| 8461.50.80.90 | Other | |
| 8461.90 | Other: | |
| 8461.90.30 | Numerically controlled | 4.4% |
| 8461.90.30.20 | Used or rebuilt | |
| 8461.90.30.40 | Other | |
| 8461.90.30.60 | Used or rebuilt | |
| 8461.90.30.80 | Other | |
| 8461.90.60 | Other | 4.4% |
| 8461.90.60.10 | Used or rebuilt | |
| 8461.90.60.20 | Other, valued under $3,025 each | |
| 8461.90.60.30 | Other | |
| 8461.90.60.40 | Used or rebuilt | |
| 8461.90.60.50 | Other, valued under $3,025 each | |
| 8461.90.60.90 | Other | |
| 8462 | Machine tools (including presses) for working metal by forging, hammering or die forging (excluding rolling mills); machine tools (including presses, slitting lines and cut-to-length lines) for working metal by bending, folding, straightening, flattening, shearing, punching, notching or nibbling (excluding drawbenches); presses for working metal or metal carbides, not specified above: | |
| 8462.11.00 | Closed die forging machines | 4.4% |
| 8462.11.00.10 | Used or rebuilt | |
| 8462.11.00.30 | Headers and upsetters, including cold headers | |
| 8462.11.00.35 | Mechanical transfer presses | |
| 8462.11.00.55 | Other | |
| 8462.19.00 | Other | 4.4% |
| 8462.19.00.10 | Used or rebuilt | |
| 8462.19.00.30 | Headers and upsetters, including cold headers | |
| 8462.19.00.35 | Mechanical transfer presses | |
| 8462.19.00.55 | Other | |
| 8462.22.00 | Profile forming machines | 4.4% |
| 8462.22.00.10 | Used or rebuilt | |
| 8462.22.00.20 | Other, valued under $3,025 each | |
| 8462.22.00.50 | Other | |
| 8462.23.00 | Numerically controlled press brakes | 4.4% |
| 8462.23.00.10 | Used or rebuilt | |
| 8462.23.00.20 | Other, valued under $3,025 each | |
| 8462.23.00.50 | Other | |
| 8462.24.00 | Numerically controlled panel benders | 4.4% |
| 8462.24.00.10 | Used or rebuilt | |
| 8462.24.00.20 | Other, valued under $3,025 each | |
| 8462.24.00.50 | Other | |
| 8462.25.00 | Numerically controlled roll forming machines | 4.4% |
| 8462.25.00.10 | Used or rebuilt | |
| 8462.25.00.20 | Other, valued under $3,025 each | |
| 8462.25.00.50 | Other | |
| 8462.26.00 | Other numerically controlled bending, folding, straightening or flattening machines | 4.4% |
| 8462.26.00.10 | Used or rebuilt | |
| 8462.26.00.20 | Other, valued under $3,025 each | |
| 8462.26.00.50 | Other | |
| 8462.29.00 | Other | 4.4% |
| 8462.29.00.10 | Used or rebuilt | |
| 8462.29.00.20 | Other, valued under $3,025 each | |
| 8462.29.00.30 | Press brakes | |
| 8462.29.00.40 | Bending rolls | |
| 8462.29.00.50 | Other | |
| 8462.32 | Slitting lines and cut-to-length lines: | |
| 8462.32.10 | Numerically controlled | 4.4% |
| 8462.32.10.40 | Used or rebuilt | |
| 8462.32.10.80 | Other | |
| 8462.32.50 | Other | 4.4% |
| 8462.32.50.10 | Used or rebuilt | |
| 8462.32.50.20 | Other, valued under $3,025 each | |
| 8462.32.50.50 | Other | |
| 8462.33.00 | Numerically controlled shearing machines | 4.4% |
| 8462.33.00.40 | Used or rebuilt | |
| 8462.33.00.80 | Other | |
| 8462.39.00 | Other | 4.4% |
| 8462.39.00.10 | Used or rebuilt | |
| 8462.39.00.20 | Other, valued under $3,025 each | |
| 8462.39.00.50 | Other | |
| 8462.42.00 | Numerically controlled | 4.4% |
| 8462.42.00.40 | Used or rebuilt | |
| 8462.42.00.80 | Other | |
| 8462.49.00 | Other | 4.4% |
| 8462.49.00.10 | Used or rebuilt | |
| 8462.49.00.20 | Other, valued under $3,025 each | |
| 8462.49.00.50 | Other | |
| 8462.51.00 | Numerically controlled | 4.4% |
| 8462.51.00.40 | Used or rebuilt | |
| 8462.51.00.80 | Other | |
| 8462.59.00 | Other | 4.4% |
| 8462.59.00.10 | Used or rebuilt | |
| 8462.59.00.20 | Other, valued under $3,025 each | |
| 8462.59.00.50 | Other | |
| 8462.61 | Hydraulic presses: | |
| 8462.61.40 | Numerically controlled | 4.4% |
| 8462.61.40.30 | Used or rebuilt | |
| 8462.61.40.60 | Other | |
| 8462.61.80 | Other | 4.4% |
| 8462.61.80.30 | Used or rebuilt | |
| 8462.61.80.90 | Other | |
| 8462.62 | Mechanical presses: | |
| 8462.62.40 | Numerically controlled | 4.4% |
| 8462.62.40.10 | Used or rebuilt | |
| 8462.62.40.30 | Other | |
| 8462.62.50 | Other | 4.4% |
| 8462.62.50.30 | Used or rebuilt | |
| 8462.62.50.90 | Other | |
| 8462.63 | Servo-presses: | |
| 8462.63.40 | Numerically controlled | 4.4% |
| 8462.63.40.10 | Used or rebuilt | |
| 8462.63.40.30 | Other | |
| 8462.63.80 | Other | 4.4% |
| 8462.63.80.10 | Used or rebuilt | |
| 8462.63.80.20 | Other, valued under $3,025 each | |
| 8462.63.80.60 | Other | |
| 8462.69 | Other: | |
| 8462.69.40 | Numerically controlled | 4.4% |
| 8462.69.40.10 | Used or rebuilt | |
| 8462.69.40.30 | Other | |
| 8462.69.80 | Other | 4.4% |
| 8462.69.80.10 | Used or rebuilt | |
| 8462.69.80.20 | Other, valued under $3,025 each | |
| 8462.69.80.60 | Other | |
| 8462.90 | Other: | |
| 8462.90.40 | Numerically controlled | 4.4% |
| 8462.90.40.10 | Used or rebuilt | |
| 8462.90.40.30 | Other | |
| 8462.90.80 | Other | 4.4% |
| 8462.90.80.10 | Used or rebuilt | |
| 8462.90.80.20 | Other, valued under $3,025 each | |
| 8462.90.80.60 | Other | |
| 8463 | Other machine tools for working metal or cermets, without removing material: | |
| 8463.10.00 | Drawbenches for bars, tubes, profiles, wire or the like | 4.4% |
| 8463.10.00.40 | Used or rebuilt | |
| 8463.10.00.60 | Other, valued under $3,025 each | |
| 8463.10.00.80 | Other | |
| 8463.20.00 | Thread rolling machines | 4.4% |
| 8463.20.00.40 | Used or rebuilt | |
| 8463.20.00.60 | Other, valued under $3,025 each | |
| 8463.20.00.80 | Other | |
| 8463.30.00 | Machines for working wire | 4.4% |
| 8463.30.00.40 | Used or rebuilt | |
| 8463.30.00.60 | Other, valued under $3,025 each | |
| 8463.30.00.80 | Other | |
| 8463.90.00 | Other | 4.4% |
| 8463.90.00.40 | Used or rebuilt | |
| 8463.90.00.60 | Other, valued under $3,025 each | |
| 8463.90.00.80 | Other | |
| 8464 | Machine tools for working stone, ceramics, concrete, asbestos-cement or like mineral materials or for cold working glass: | |
| 8464.10.01.00 | Sawing machines | Free |
| 8464.20.01 | Grinding or polishing machines | 2% |
| 8464.20.01.10 | Glass-working machines | |
| 8464.20.01.20 | Other | |
| 8464.90.01 | Other | 2% |
| 8464.90.01.10 | Glass-working machines | |
| 8464.90.01.20 | Other | |
| 8465 | Machine tools (including machines for nailing, stapling, glueing or otherwise assembling) for working wood, cork, bone, hard rubber, hard plastics or similar hard materials: | |
| 8465.10.00 | Machines which can carry out different types of machining operations without tool change between such operations | 2.4% |
| 8465.10.00.05 | Tenoners | |
| 8465.10.00.15 | Other | |
| 8465.10.00.25 | Numerically controlled | |
| 8465.10.00.35 | Other | |
| 8465.10.00.45 | Other | |
| 8465.10.00.50 | Other | |
| 8465.20 | Machining centers: | |
| 8465.20.10.00 | For sawing, planing, milling, molding, grinding, sanding, polishing, drilling or mortising | 3% |
| 8465.20.50.00 | For bending or assembling | 2.9% |
| 8465.20.80.00 | Other | 2.4% |
| 8465.91.00 | Sawing machines | 3% |
| 8465.91.00.02 | Rip saws | |
| 8465.91.00.06 | Panel saws | |
| 8465.91.00.12 | Band saws | |
| 8465.91.00.16 | Cross-cut and optimizing saws | |
| 8465.91.00.22 | Other | |
| 8465.91.00.27 | Sawmill machines | |
| 8465.91.00.32 | Radial arm saws | |
| 8465.91.00.36 | Tilting arbor table saws | |
| 8465.91.00.41 | Rip saws | |
| 8465.91.00.47 | Miter saws | |
| 8465.91.00.49 | Scroll saws | |
| 8465.91.00.53 | Valued under $3,000 each | |
| 8465.91.00.58 | Other | |
| 8465.91.00.64 | Valued under $1,000 each | |
| 8465.91.00.68 | Other | |
| 8465.91.00.74 | Cross-cut and optimizing saws | |
| 8465.91.00.78 | Other | |
| 8465.91.00.91 | Other | |
| 8465.92.00 | Planing, milling or molding (by cutting) machines | 3% |
| 8465.92.00.03 | Moulders | |
| 8465.92.00.06 | Routers | |
| 8465.92.00.16 | Other | |
| 8465.92.00.26 | Valued under $3,000 each | |
| 8465.92.00.29 | Other | |
| 8465.92.00.31 | Moulders | |
| 8465.92.00.34 | Valued under $1,000 each | |
| 8465.92.00.37 | Other | |
| 8465.92.00.42 | Valued under $1,000 each | |
| 8465.92.00.46 | Other | |
| 8465.92.00.51 | Valued under $3,000 each | |
| 8465.92.00.55 | Numerically controlled | |
| 8465.92.00.58 | Other | |
| 8465.92.00.62 | Valued under $1,000 each | |
| 8465.92.00.66 | Other | |
| 8465.92.00.72 | Other | |
| 8465.92.00.91 | Other | |
| 8465.93.00 | Grinding, sanding or polishing machines | 3% |
| 8465.93.00.04 | Belt sanders, for a belt width <il>60 cm</il> or wider | |
| 8465.93.00.12 | Other | |
| 8465.93.00.30 | Valued under $1,000 each | |
| 8465.93.00.45 | Valued $1,000 or over but under $3,000 each | |
| 8465.93.00.55 | Other | |
| 8465.93.00.65 | Belt sanders, for a belt width <il>60 cm</il> or wider | |
| 8465.93.00.75 | Other | |
| 8465.93.00.91 | Other | |
| 8465.94.00 | Bending or assembling machines | 2.9% |
| 8465.94.00.05 | Used or rebuilt | |
| 8465.94.00.15 | Doweling machines | |
| 8465.94.00.25 | Edgebanding machines | |
| 8465.94.00.35 | Laminating machines | |
| 8465.94.00.45 | Cold | |
| 8465.94.00.55 | Other | |
| 8465.94.00.65 | Other | |
| 8465.94.00.91 | Other | |
| 8465.95.00 | Drilling or mortising machines | 3% |
| 8465.95.00.05 | Numerically controlled boring machines | |
| 8465.95.00.10 | Other | |
| 8465.95.00.20 | Numerically controlled | |
| 8465.95.00.35 | Valued under $3,000 each | |
| 8465.95.00.45 | Other | |
| 8465.95.00.55 | Valued under $1,000 each | |
| 8465.95.00.60 | Other | |
| 8465.95.00.65 | Other | |
| 8465.95.00.91 | Other | |
| 8465.96.00 | Splitting, slicing or paring machines | 2.4% |
| 8465.96.00.15 | Log splitters | |
| 8465.96.00.25 | Chippers | |
| 8465.96.00.30 | Hogs | |
| 8465.96.00.40 | Other | |
| 8465.96.00.51 | Other | |
| 8465.99.02 | Other | 2.4% |
| 8465.99.02.10 | Debarkers | |
| 8465.99.02.20 | Lathes | |
| 8465.99.02.30 | Other | |
| 8465.99.02.50 | Other | |
| 8466 | Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand: | |
| 8466.10.01 | Tool holders and self-opening dieheads | 3.9% |
| 8466.10.01.10 | Tool holders for forming-type or cutting-type dies | |
| 8466.10.01.30 | Holders for replaceable cutting or drill inserts | |
| 8466.10.01.75 | Other | |
| 8466.20 | Work holders: | |
| 8466.20.10 | For machine tools used in cutting gears | 4.6% |
| 8466.20.10.10 | Jigs and fixtures | |
| 8466.20.10.90 | Other | |
| 8466.20.80 | Other | 3.7% |
| 8466.20.80.20 | Jigs and fixtures | |
| 8466.20.80.35 | Other | |
| 8466.20.80.40 | Jigs and fixtures | |
| 8466.20.80.65 | Other | |
| 8466.30 | Dividing heads and other special attachments for machines: | |
| 8466.30.10.00 | Dividing heads | 3.7% |
| 8466.30.60 | Machines | 2.9% |
| 8466.30.60.40 | For woodworking machines | |
| 8466.30.60.85 | Other | |
| 8466.30.80.00 | Other | 8% |
| 8466.91 | For machines of heading 8464: | |
| 8466.91.10.00 | Cast-iron parts not advanced beyond cleaning, and machined only for the removal of fins, gates, sprues and risers or to permit location in finishing machinery | Free |
| 8466.91.50.00 | Other | Free |
| 8466.92 | For machines of heading 8465: | |
| 8466.92.10.00 | Cast-iron parts not advanced beyond cleaning, and machined only for the removal of fins, gates, sprues and risers or to permit location in finishing machinery | Free |
| 8466.92.50 | Other | 4.7% |
| 8466.92.50.10 | Of woodworking machines | |
| 8466.92.50.90 | Other | |
| 8466.93 | For machines of headings 8456 to 8461: | |
| 8466.93.11.00 | For water-jet cutting machines | Free |
| 8466.93.15 | Cast-iron parts not advanced beyond cleaning, and machined only for the removal of fins, gates, sprues and risers or to permit location in finishing machinery | Free |
| 8466.93.15.30 | For metalworking machine tools for cutting, grinding or finishing gears | |
| 8466.93.15.60 | Other | |
| 8466.93.30.00 | Of metalworking machine tools for cutting gears | 5.8% |
| 8466.93.53 | Other | 4.7% |
| 8466.93.53.40 | Of metalworking machine tools for grinding or finishing gears | |
| 8466.93.53.85 | Other | |
| 8466.93.60 | Cast-iron parts not advanced beyond cleaning, and machined only for the removal of fins, gates, sprues and risers or to permit location in finishing machinery | Free |
| 8466.93.60.30 | For metalworking machine tools for cutting, grinding or finishing gears | |
| 8466.93.60.60 | Other | |
| 8466.93.75.00 | Of metalworking machine tools for cutting gears | 5.8% |
| 8466.93.96.00 | Parts and accessories of machine tools of subheadings 8456.11, 8456.12, 8456.30, 8457.10, 8458.91, 8459.21, 8459.61 and 8461.50, of a kind used solely or principally for the manufacture of printed circuits, printed circuit assemblies, parts of heading 8517 or parts of automatic data processing machines | Free |
| 8466.93.98 | Other | 4.7% |
| 8466.93.98.40 | Of metalworking machine tools for grinding or finishing gears | |
| 8466.93.98.85 | Other | |
| 8466.94 | For machines of heading 8462 or 8463: | |
| 8466.94.20.00 | Bed, base, table, column, cradle, frame, bolster, crown, slide, rod, tailstock and headstock castings, weldments or fabrications | Free |
| 8466.94.40.00 | Other | Free |
| 8466.94.65 | Bed, base, table, column, cradle, frame, bolster, crown, slide, rod, tailstock and headstock castings, weldments or fabrications | 4.7% |
| 8466.94.65.40 | Parts of mechanical transfer presses | |
| 8466.94.65.85 | Other | |
| 8466.94.85 | Other | 4.7% |
| 8466.94.85.40 | Parts of mechanical transfer presses | |
| 8466.94.85.85 | Other | |
| 8467 | Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or nonelectric motor, and parts thereof: | |
| 8467.11 | Rotary type (including combined rotary-percussion): | |
| 8467.11.10 | Suitable for metal working | 4.5% |
| 8467.11.10.40 | Grinders, polishers and sanders | |
| 8467.11.10.80 | Other | |
| 8467.11.50 | Other | Free |
| 8467.11.50.10 | Rock drills | |
| 8467.11.50.20 | Drills, other than rock drills; screwdrivers and nut runners | |
| 8467.11.50.40 | Wrenches, other than nut runners | |
| 8467.11.50.90 | Other | |
| 8467.19 | Other: | |
| 8467.19.10.00 | Suitable for metal working | 4.5% |
| 8467.19.50 | Other | Free |
| 8467.19.50.30 | Pneumatic, hand-held force feed lubricating equipment | |
| 8467.19.50.60 | Designed for use in construction or mining | |
| 8467.19.50.90 | Other | |
| 8467.21.00 | Drills of all kinds | 1.7% |
| 8467.21.00.10 | Battery powered | |
| 8467.21.00.30 | With a chuck capacity of less than <il>12.7 mm</il> | |
| 8467.21.00.50 | Other | |
| 8467.21.00.70 | Other, including hammer drills | |
| 8467.22.00 | Saws | Free |
| 8467.22.00.20 | Circular | |
| 8467.22.00.40 | Chain | |
| 8467.22.00.70 | Reciprocating and jig | |
| 8467.22.00.90 | Other | |
| 8467.29.00 | Other | Free |
| 8467.29.00.10 | Angle grinders, sanders and polishers | |
| 8467.29.00.15 | Orbital and straight-line sanders | |
| 8467.29.00.25 | Belt sanders | |
| 8467.29.00.35 | Other | |
| 8467.29.00.40 | Screwdrivers, nut-runners and impact wrenches | |
| 8467.29.00.55 | Routers | |
| 8467.29.00.65 | Planers | |
| 8467.29.00.70 | Grass and weed trimmers/edgers | |
| 8467.29.00.80 | Electropneumatic rotary and percussion hammers | |
| 8467.29.00.85 | Electric scissors | |
| 8467.29.00.90 | Other | |
| 8467.81.00.00 | Chain saws | Free |
| 8467.89 | Other: | |
| 8467.89.10.00 | Suitable for metal working | Free |
| 8467.89.50 | Other | Free |
| 8467.89.50.30 | Gasoline powered grass and weed trimmers and brushcutters | |
| 8467.89.50.60 | Other, designed for use in agriculture or horticulture | |
| 8467.89.50.90 | Other | |
| 8467.91.01.00 | Of chain saws | Free |
| 8467.92.00 | Of pneumatic tools | Free |
| 8467.92.00.50 | Of pneumatic, hand-held force feed lubricating equipment | |
| 8467.92.00.90 | Other | |
| 8467.99.01 | Other | Free |
| 8467.99.01.30 | Of gasoline powered grass and weed trimmers and brushcutters | |
| 8467.99.01.90 | Other | |
| 8468 | Machinery and apparatus for soldering, brazing or welding, whether or not capable of cutting, other than those of heading 8515; gas-operated surface tempering machines and appliances; parts thereof: | |
| 8468.10.00.00 | Hand-held blow torches | 2.9% |
| 8468.20 | Other gas-operated machinery and apparatus: | |
| 8468.20.10.00 | Hand-directed or -controlled | 3.9% |
| 8468.20.50.00 | Other | Free |
| 8468.80 | Other machinery and apparatus: | |
| 8468.80.10.00 | Hand-directed or -controlled | 2.9% |
| 8468.80.50.00 | Other | Free |
| 8468.90 | Parts: | |
| 8468.90.10.00 | Of hand-directed or -controlled machinery and apparatus | 2.9% |
| 8468.90.50.00 | Other | Free |
| 8470 | Calculating machines and pocket-size data recording, reproducing and displaying machines with calculating functions; accounting machines, postage-franking machines, ticket-issuing machines and similar machines, incorporating a calculating device; cash registers: | |
| 8470.10.00 | Electronic calculators capable of operation without an external source of electric power and pocket-size data recording, reproducing and displaying machines with calculating functions | Free |
| 8470.10.00.40 | Display only | |
| 8470.10.00.60 | Other | |
| 8470.21.00.00 | Incorporating a printing device | Free |
| 8470.29.00.00 | Other | Free |
| 8470.30.00.00 | Other calculating machines | Free |
| 8470.50.00 | Cash registers | Free |
| 8470.50.00.20 | Point-of-sale terminals | |
| 8470.50.00.60 | Other | |
| 8470.90.01 | Other | Free |
| 8470.90.01.10 | Postage-franking machines | |
| 8470.90.01.90 | Other | |
| 8471 | Automatic data processing machines and units thereof; magnetic or optical readers, machines for transcribing data onto data media in coded form and machines for processing such data, not elsewhere specified or included: | |
| 8471.30.01.00 | Portable automatic data processing machines, weighing not more than <il>10 kg</il>, consisting of at least a central processing unit, a keyboard and a display | Free |
| 8471.41.01 | Comprising in the same housing at least a central processing unit and an input and output unit, whether or not combined | Free |
| 8471.41.01.10 | With cathode-ray tube (CRT) | |
| 8471.41.01.50 | Other | |
| 8471.49.00.00 | Other, entered in the form of systems | Free |
| 8471.50.01 | Processing units other than those of subheading 8471.41 or 8471.49, whether or not containing in the same housing one or two of the following types of unit: storage units, input units, output units | Free |
| 8471.50.01.10 | With cathode-ray tube (CRT) | |
| 8471.50.01.50 | Other | |
| 8471.60 | Input or output units, whether or not containing storage units in the same housing: | |
| 8471.60.10 | Combined input/output units | Free |
| 8471.60.10.10 | With cathode-ray tube (CRT) | |
| 8471.60.10.50 | Other | |
| 8471.60.20.00 | Keyboards | Free |
| 8471.60.70.00 | Units suitable for physical incorporation into automatic data processing machines or units thereof | Free |
| 8471.60.80.00 | Optical scanners and magnetic ink recognition devices | Free |
| 8471.60.90 | Other | Free |
| 8471.60.90.30 | Card key and magnetic media entry devices | |
| 8471.60.90.50 | Other | |
| 8471.70 | Storage units: | |
| 8471.70.10.00 | Without read-write unit assembled therein; read-write units entered separately | Free |
| 8471.70.20.00 | Units for physical incorporation into automatic data processing machines or units thereof | Free |
| 8471.70.30.00 | Other | Free |
| 8471.70.40 | Not assembled in cabinets, and without attached external power supply | Free |
| 8471.70.40.35 | Flexible (floppy) magnetic disk drive units | |
| 8471.70.40.65 | Hard magnetic disk drive units | |
| 8471.70.40.95 | Other | |
| 8471.70.50 | Other | Free |
| 8471.70.50.35 | Flexible (floppy) magnetic disk drive units | |
| 8471.70.50.65 | Hard magnetic disk drive units | |
| 8471.70.50.95 | Other | |
| 8471.70.60.00 | Not assembled in cabinets for placing on a table, desk, wall, floor or similar place | Free |
| 8471.70.90.00 | Other | Free |
| 8471.80 | Other units of automatic data processing machines: | |
| 8471.80.10.00 | Control or adapter units | Free |
| 8471.80.40.00 | Units suitable for physical incorporation into automatic data processing machines | Free |
| 8471.80.90.00 | Other | Free |
| 8471.90.00.00 | Other | Free |
| 8472 | Other office machines (for example, hectograph or stencil duplicating machines, addressing machines, automatic banknote dispensers, coin-sorting machines, coin-counting or wrapping machines, pencil-sharpening machines, perforating or stapling machines): | |
| 8472.10.00.00 | Duplicating machines | Free |
| 8472.30.00.00 | Machines for sorting or folding mail or for inserting mail in envelopes or bands, machines for opening, closing or sealing mail and machines for affixing or canceling postage stamps | 1.8% |
| 8472.90 | Other: | |
| 8472.90.05.00 | Addressing machines and address plate embossing machines | Free |
| 8472.90.10.00 | Automatic teller machines | Free |
| 8472.90.40.00 | Pencil sharpeners | Free |
| 8472.90.50.00 | Typewriters other than printers of heading 8443; word processing machines | Free |
| 8472.90.60.00 | Numbering, dating and check-writing machines | Free |
| 8472.90.90 | Other | Free |
| 8472.90.90.40 | Desktop note counters and note scanners | |
| 8472.90.90.60 | Other currency and coin handling machines | |
| 8472.90.90.80 | Other | |
| 8473 | Parts and accessories (other than covers, carrying cases and the like) suitable for use solely or principally with machines of headings 8470 to 8472: | |
| 8473.21.00.00 | Of the electronic calculating machines of subheading 8470.10, 8470.21 or 8470.29 | Free |
| 8473.29.00.00 | Other | Free |
| 8473.30 | Parts and accessories of the machines of heading 8471: | |
| 8473.30.11 | Printed circuit assemblies | Free |
| 8473.30.11.40 | Memory modules suitable for use solely or principally with machines of heading 8471 | |
| 8473.30.11.80 | Other | |
| 8473.30.20.00 | Parts and accessories, including face plates and lock latches, of printed circuit assemblies | Free |
| 8473.30.51.00 | Other | Free |
| 8473.30.91.00 | Other | Free |
| 8473.40 | Parts and accessories of the machines of heading 8472: | |
| 8473.40.10.00 | Printed circuit assemblies for automatic teller machines of subheading 8472.90.10 | Free |
| 8473.40.21.00 | Printed circuit assemblies of word processing machines of 8472.90.50 | Free |
| 8473.40.41.00 | Other parts and accessories of the machines of 8472.90.50 | 2% |
| 8473.40.86.00 | Other | Free |
| 8473.50 | Parts and accessories equally suitable for use with machines of two or more of the headings 8470 to 8472: | |
| 8473.50.30.00 | Printed circuit assemblies | Free |
| 8473.50.60.00 | Parts and accessories, including face plates and lock latches, of printed circuit assemblies | Free |
| 8473.50.90.00 | Other | Free |
| 8474 | Machinery for sorting, screening, separating, washing, crushing, grinding, mixing or kneading earth, stone, ores or other mineral substances, in solid (including powder or paste) form; machinery for agglomerating, shaping or molding solid mineral fuels, ceramic paste, unhardened cements, plastering materials or other mineral products in powder or paste form; machines for forming foundry molds of sand; parts thereof: | |
| 8474.10.00 | Sorting, screening, separating or washing machines | Free |
| 8474.10.00.10 | Portable | |
| 8474.10.00.90 | Stationary | |
| 8474.20.00 | Crushing or grinding machines | Free |
| 8474.20.00.10 | Portable | |
| 8474.20.00.50 | Crushing | |
| 8474.20.00.70 | Other | |
| 8474.31.00.00 | Concrete or mortar mixers | Free |
| 8474.32.00.00 | Machines for mixing mineral substances with bitumen | Free |
| 8474.39.00.00 | Other | Free |
| 8474.80.00 | Other machinery | Free |
| 8474.80.00.10 | Designed for use with ceramic paste, unhardened cements and plastering materials | |
| 8474.80.00.15 | Other | |
| 8474.80.00.20 | Machines for forming foundry molds of sand | |
| 8474.80.00.80 | Other | |
| 8474.90.00 | Parts | Free |
| 8474.90.00.10 | Of sorting, screening, separating or washing machines | |
| 8474.90.00.20 | Of crushing or grinding machines | |
| 8474.90.00.50 | Of mixing or kneading machines | |
| 8474.90.00.90 | Other | |
| 8475 | Machines for assembling electric or electronic lamps, tubes or flashbulbs, in glass envelopes; machines for manufacturing or hot working glass or glassware; parts thereof: | |
| 8475.10.00.00 | Machines for assembling electric or electronic lamps, tubes or flashbulbs, in glass envelopes | Free |
| 8475.21.00.00 | Machines for making optical fibers and preforms thereof | Free |
| 8475.29.00.00 | Other | Free |
| 8475.90 | Parts: | |
| 8475.90.10.00 | Of machines for assembling electric or electronic lamps, tubes or flashbulbs, in glass envelopes | Free |
| 8475.90.90.00 | Other | Free |
| 8476 | Automatic goods-vending machines (for example, postage stamp, cigarette, food or beverage machines), including money-changing machines; parts thereof: | |
| 8476.21.00.00 | Incorporating heating or refrigerating devices | Free |
| 8476.29.00.00 | Other | Free |
| 8476.81.00.00 | Incorporating heating or refrigerating devices | Free |
| 8476.89.00.00 | Other | Free |
| 8476.90.00.00 | Parts | Free |
| 8477 | Machinery for working rubber or plastics or for the manufacture of products from these materials, not specified or included elsewhere in this chapter; parts thereof: | |
| 8477.10 | Injection-molding machines: | |
| 8477.10.30.00 | For manufacturing shoes | Free |
| 8477.10.40.00 | For use in the manufacture of optical media | Free |
| 8477.10.90 | Other | 3.1% |
| 8477.10.90.15 | Of a type used for processing rubber or other thermosetting materials | |
| 8477.10.90.30 | With a clamp force less than <il>50 tons</il> | |
| 8477.10.90.40 | With a clamp force equal to or greater than <il>50 tons</il> and less than <il>300 tons</il> | |
| 8477.10.90.50 | With a clamp force equal to or greater than <il>300 tons</il> and less than <il>750 tons</il> | |
| 8477.10.90.60 | With a clamp force equal to or greater than <il>750 tons</il> | |
| 8477.20.00 | Extruders | 3.1% |
| 8477.20.00.05 | Single screw | |
| 8477.20.00.15 | Other, including multiple screw | |
| 8477.20.00.35 | Less than <il>6.4 cm</il> | |
| 8477.20.00.45 | <il>6.4 cm</il> or greater | |
| 8477.20.00.55 | With a screw size less than <il>6.4 cm</il> | |
| 8477.20.00.65 | With a screw size <il>6.4 cm</il> or greater | |
| 8477.30.00.00 | Blow-molding machines | 3.1% |
| 8477.40.01.00 | Vacuum-molding machines and other thermoforming machines | 3.1% |
| 8477.51.00 | For molding or retreading pneumatic tires or for molding or otherwise forming inner tubes | 3.1% |
| 8477.51.00.10 | For molding or retreading pneumatic tires | |
| 8477.51.00.90 | Other | |
| 8477.59.01.00 | Other | 3.1% |
| 8477.80.01.00 | Other machinery | 3.1% |
| 8477.90 | Parts: | |
| 8477.90.25 | Base, bed, platen, clamp cylinder, ram, and injection castings, weldments and fabrications | 3.1% |
| 8477.90.25.40 | Of machines of subheading 8477.10.30, 8477.10.40 or 8477.10.90 | |
| 8477.90.25.80 | Other | |
| 8477.90.45.01 | Barrel screws | 3.1% |
| 8477.90.65.00 | Hydraulic assemblies incorporating more than one of the following: manifold; valves; pump; oil cooler | 3.1% |
| 8477.90.86 | Other | 3.1% |
| 8477.90.86.01 | Of injection-molding machines | |
| 8477.90.86.20 | Of extruders | |
| 8477.90.86.30 | Of blow-molding machines | |
| 8477.90.86.40 | Of machines for forming pneumatic tires | |
| 8477.90.86.95 | Other parts | |
| 8478 | Machinery for preparing or making up tobacco, not specified or included elsewhere in this chapter; parts thereof: | |
| 8478.10.00 | Machinery | Free |
| 8478.10.00.10 | Industrial cigarette-making machines | |
| 8478.10.00.90 | Other | |
| 8478.90.00 | Parts | Free |
| 8478.90.00.10 | Parts of industrial cigarette-making machines | |
| 8478.90.00.90 | Other | |
| 8479 | Machines and mechanical appliances having individual functions, not specified or included elsewhere in this chapter; parts thereof: | |
| 8479.10.00 | Machinery for public works, building or the like | Free |
| 8479.10.00.40 | For concrete | |
| 8479.10.00.60 | For bituminous material | |
| 8479.10.00.80 | Other | |
| 8479.20.00.00 | Machinery for the extraction or preparation of animal or fixed vegetable or microbial fats or oils | Free |
| 8479.30.00.00 | Presses for the manufacture of particle board or fiber building board of wood or other ligneous materials and other machinery for treating wood or cork | Free |
| 8479.40.00.00 | Rope or cable-making machines | Free |
| 8479.50.00.00 | Industrial robots, not elsewhere specified or included | 2.5% |
| 8479.60.00.00 | Evaporative air coolers | 2.8% |
| 8479.71.00.00 | Of a kind used in airports | Free |
| 8479.79.00.00 | Other | Free |
| 8479.81.00.00 | For treating metal, including electric wire coil-winders | Free |
| 8479.82.00 | Mixing, kneading, crushing, grinding, screening, sifting, homogenizing, emulsifying or stirring machines | Free |
| 8479.82.00.40 | Mixing, kneading or stirring machines | |
| 8479.82.00.80 | Other | |
| 8479.83.00.00 | Cold isostatic presses | 2.5% |
| 8479.89 | Other: | |
| 8479.89.10.00 | Air humidifiers or dehumidifiers | Free |
| 8479.89.20.00 | Floor polishers | Free |
| 8479.89.55.00 | Trash compactors | 2.8% |
| 8479.89.65.00 | Other | 2.8% |
| 8479.89.70.00 | Carpet sweepers | Free |
| 8479.89.83.00 | Machines for the manufacturing of optical media | Free |
| 8479.89.92.00 | Automated electronic component placement machines of a kind used solely or principally for the manufacture of printed circuit assemblies | Free |
| 8479.89.95 | Other | 2.5% |
| 8479.89.95.50 | Oil and gas field wireline and downhole equipment | |
| 8479.89.95.60 | Automotive maintenance machines | |
| 8479.89.95.65 | Hydraulic accumulators | |
| 8479.89.95.85 | Ultrasonic cleaning devices | |
| 8479.89.95.95 | Industrial vibrators | |
| 8479.89.95.96 | Tow behind sweepers | |
| 8479.89.95.99 | Other | |
| 8479.90 | Parts: | |
| 8479.90.41.00 | Of articles of subheading 8479.89.10 or 8479.89.70 | Free |
| 8479.90.45.00 | Frame assemblies incorporating more than one of the following: baseplate; side frames; power screws; front plates | Free |
| 8479.90.55.00 | Ram assemblies incorporating a ram wrapper and/or ram cover | Free |
| 8479.90.65.00 | Container assemblies incorporating more than one of the following: container bottom; container wrapper; slide track; container front | Free |
| 8479.90.75.00 | Cabinets or cases | Free |
| 8479.90.85.00 | Other | Free |
| 8479.90.95 | Other | Free |
| 8479.90.95.30 | Of industrial robots | |
| 8479.90.95.50 | Of machinery for public works, building or the like | |
| 8479.90.95.60 | Of presses for the manufacture of particle board or fiber building board of wood or other ligneous materials and other machinery for treating wood or cork | |
| 8479.90.95.65 | Of machines or mechanical appliances for treating metal | |
| 8479.90.95.96 | Other | |
| 8480 | Molding boxes for metal foundry; mold bases; molding patterns; molds for metal (other than ingot molds), metal carbides, glass, mineral materials, rubber or plastics: | |
| 8480.10.00.00 | Molding boxes for metal foundry | 3.8% |
| 8480.20.00.00 | Mold bases | 3.4% |
| 8480.30.00.00 | Molding patterns | 2.8% |
| 8480.41.00.00 | Injection or compression types | 3.1% |
| 8480.49.00 | Other types | 3.1% |
| 8480.49.00.10 | Molds for centrifugal casting of ductile iron pipe | |
| 8480.49.00.90 | Other | |
| 8480.50.00 | Molds for glass | Free |
| 8480.50.00.10 | Injection or compression types | |
| 8480.50.00.90 | Other types | |
| 8480.60.00 | Molds for mineral materials | Free |
| 8480.60.00.10 | Injection or compression types | |
| 8480.60.00.90 | Other types | |
| 8480.71 | Injection or compression types: | |
| 8480.71.10.00 | For shoe machinery | Free |
| 8480.71.40.00 | For the manufacture of semiconductor devices | Free |
| 8480.71.80 | Other | 3.1% |
| 8480.71.80.20 | Temporarily imported for testing, calibration, examination, repair or alteration; returned after being exported for testing, calibration, examination, repair or alteration | |
| 8480.71.80.45 | Injection type | |
| 8480.71.80.60 | Compression type | |
| 8480.79 | Other types: | |
| 8480.79.10.00 | Molds for shoe machinery | Free |
| 8480.79.90 | Other | 3.1% |
| 8480.79.90.10 | Blow molds | |
| 8480.79.90.20 | Bladder operated molds | |
| 8480.79.90.90 | Other molds | |
| 8481 | Taps, cocks, valves and similar appliances, for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves; parts thereof: | |
| 8481.10.00 | Pressure-reducing valves | 2% |
| 8481.10.00.20 | Hydraulic fluid power type | |
| 8481.10.00.40 | Filter-regulators and filter-regulator-lubricators | |
| 8481.10.00.60 | Other | |
| 8481.10.00.90 | Other | |
| 8481.20.00 | Valves for oleohydraulic or pneumatic transmissions | 2% |
| 8481.20.00.10 | Manual type | |
| 8481.20.00.20 | Solenoid type | |
| 8481.20.00.30 | Other | |
| 8481.20.00.40 | Flow control type | |
| 8481.20.00.50 | Other | |
| 8481.20.00.60 | Solenoid type | |
| 8481.20.00.70 | Other | |
| 8481.20.00.80 | Other | |
| 8481.30 | Check (nonreturn) valves: | |
| 8481.30.10 | Of copper | 3% |
| 8481.30.10.10 | Having a pressure rating under <il>850 kPa</il> | |
| 8481.30.10.90 | Having a pressure rating of <il>850 kPa</il> or over | |
| 8481.30.20 | Of iron or steel | 5% |
| 8481.30.20.10 | Of iron | |
| 8481.30.20.90 | Of steel | |
| 8481.30.90.00 | Other | 3% |
| 8481.40.00.00 | Safety or relief valves | 2% |
| 8481.80 | Other appliances: | |
| 8481.80.10 | Of copper | 4% |
| 8481.80.10.20 | Bath and shower faucets | |
| 8481.80.10.30 | Sink and lavatory faucets | |
| 8481.80.10.40 | Supply stops | |
| 8481.80.10.50 | Other | |
| 8481.80.10.60 | Gate type | |
| 8481.80.10.70 | Globe type | |
| 8481.80.10.75 | Plug type | |
| 8481.80.10.85 | Ball type | |
| 8481.80.10.90 | Butterfly type | |
| 8481.80.10.95 | Other | |
| 8481.80.30 | Of iron or steel | 5.6% |
| 8481.80.30.10 | Gate type | |
| 8481.80.30.15 | Globe type | |
| 8481.80.30.20 | Plug type | |
| 8481.80.30.25 | Ball type | |
| 8481.80.30.30 | Butterfly type | |
| 8481.80.30.40 | Other | |
| 8481.80.30.55 | Gate type | |
| 8481.80.30.60 | Globe type | |
| 8481.80.30.65 | Plug type | |
| 8481.80.30.70 | Ball type | |
| 8481.80.30.75 | Butterfly type | |
| 8481.80.30.90 | Other | |
| 8481.80.50 | Of other materials | 3% |
| 8481.80.50.40 | Pressure spray can valves | |
| 8481.80.50.60 | Bath, shower, sink and lavatory faucets | |
| 8481.80.50.90 | Other | |
| 8481.80.90 | Other | 2% |
| 8481.80.90.05 | Solenoid valves | |
| 8481.80.90.10 | Ballcock mechanisms | |
| 8481.80.90.15 | Regulator valves, self-operating, for controlling variables such as temperature, pressure, flow and liquid level | |
| 8481.80.90.20 | Control valves designed for proportional operation by a signal from a control device | |
| 8481.80.90.25 | Other | |
| 8481.80.90.30 | With hydraulic actuators | |
| 8481.80.90.35 | Control valves designed for proportional operation by a signal from a control device | |
| 8481.80.90.40 | Other | |
| 8481.80.90.45 | With thermostatic actuators | |
| 8481.80.90.50 | Other | |
| 8481.90 | Parts: | |
| 8481.90.10.00 | Of copper | 3% |
| 8481.90.30.00 | Of iron or steel | 5% |
| 8481.90.50.00 | Of other materials | 3% |
| 8481.90.90 | Other | Free |
| 8481.90.90.20 | Valve bodies | |
| 8481.90.90.40 | Other | |
| 8481.90.90.60 | Valve bodies | |
| 8481.90.90.81 | Steel forgings | |
| 8481.90.90.85 | Other | |
| 8482 | Ball or roller bearings, and parts thereof: | |
| 8482.10 | Ball bearings: | |
| 8482.10.10 | Ball bearings with integral shafts | 2.4% |
| 8482.10.10.40 | Bearings having an outside diameter not over <il>30 mm</il> | |
| 8482.10.10.80 | Other | |
| 8482.10.50 | Other | 9% |
| 8482.10.50.04 | Unground bearings | |
| 8482.10.50.08 | Thrust bearings | |
| 8482.10.50.12 | Linear bearings | |
| 8482.10.50.16 | Flanged | |
| 8482.10.50.24 | Other | |
| 8482.10.50.28 | Other | |
| 8482.10.50.32 | Maximum or full capacity type | |
| 8482.10.50.36 | Under <il>9 mm</il> | |
| 8482.10.50.44 | <il>9 mm</il> and over but not over <il>30 mm</il> | |
| 8482.10.50.48 | Over <il>30 mm</il> but not over <il>52 mm</il> | |
| 8482.10.50.52 | Over <il>52 mm</il> but not over <il>100 mm.</il> | |
| 8482.10.50.56 | Over <il>100 mm</il> | |
| 8482.10.50.60 | Double row ball bearings | |
| 8482.10.50.64 | Other | |
| 8482.10.50.68 | Other | |
| 8482.20.00 | Tapered roller bearings, including cone and tapered roller assemblies | 5.8% |
| 8482.20.00.20 | Flanged | |
| 8482.20.00.30 | Other | |
| 8482.20.00.40 | With cups having an outside diameter not exceeding <il>102 mm</il> | |
| 8482.20.00.61 | With cups having an outside diameter exceeding 102 mm but not exceeding 203 mm | |
| 8482.20.00.64 | With cups having an outside diameter exceeding 203 mm but not exceeding 305 mm | |
| 8482.20.00.67 | Other | |
| 8482.20.00.70 | For cups having an outside diameter not exceeding <il>102 mm</il> | |
| 8482.20.00.81 | For cups having an outside diameter exceeding 102 mm but not exceeding 203 mm | |
| 8482.20.00.90 | Other | |
| 8482.30.00 | Spherical roller bearings | 5.8% |
| 8482.30.00.40 | Single row | |
| 8482.30.00.80 | Other | |
| 8482.40.00.00 | Needle roller bearings, including cage and needle roller assemblies | 5.8% |
| 8482.50.00.00 | Other cylindrical roller bearings, including cage and roller assemblies | 5.8% |
| 8482.80.00 | Other, including combined ball/roller bearings | 5.8% |
| 8482.80.00.20 | Combined ball and spherical roller bearings | |
| 8482.80.00.40 | Combined ball and needle roller bearings | |
| 8482.80.00.60 | Combined ball and other cylindrical roller bearings | |
| 8482.80.00.80 | Other | |
| 8482.91.00 | Balls, needles and rollers | 4.4% |
| 8482.91.00.10 | Of alloy steel | |
| 8482.91.00.15 | Of copper or copper alloys as described in statistical note 6 to this chapter | |
| 8482.91.00.30 | Other | |
| 8482.91.00.40 | Needles | |
| 8482.91.00.50 | Tapered rollers | |
| 8482.91.00.70 | Spherical rollers | |
| 8482.91.00.80 | Other cylindrical rollers | |
| 8482.91.00.90 | Other | |
| 8482.99 | Other: | |
| 8482.99.05.00 | For ball bearings | 9.9% |
| 8482.99.15 | For tapered roller bearings | 5.8% |
| 8482.99.15.50 | Having an outside diameter not exceeding 203 mm | |
| 8482.99.15.70 | Other | |
| 8482.99.15.80 | Other | |
| 8482.99.25 | Other | 5.8% |
| 8482.99.25.20 | For spherical roller bearings | |
| 8482.99.25.40 | For needle bearings | |
| 8482.99.25.60 | For other cylindrical roller bearings | |
| 8482.99.25.80 | Other | |
| 8482.99.35.00 | Parts of ball bearings (including parts of ball bearings with integral shafts) | 9.9% |
| 8482.99.45.00 | Parts of tapered roller bearings | 5.8% |
| 8482.99.65 | Other | 5.8% |
| 8482.99.65.10 | For spherical roller bearings | |
| 8482.99.65.30 | For needle bearings | |
| 8482.99.65.60 | For other cylindrical roller bearings | |
| 8482.99.65.95 | Other | |
| 8483 | Transmission shafts (including camshafts and crankshafts) and cranks; bearing housings, housed bearings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints); parts thereof: | |
| 8483.10 | Transmission shafts (including camshafts and crankshafts) and cranks: | |
| 8483.10.10 | Designed for use solely or principally with spark-ignition internal combustion piston engines or rotary engines | 2.5% |
| 8483.10.10.10 | For motorcycles | |
| 8483.10.10.30 | Other | |
| 8483.10.10.50 | Other | |
| 8483.10.30 | Other | 2.5% |
| 8483.10.30.10 | For vehicles of chapter 87 | |
| 8483.10.30.50 | Other | |
| 8483.10.50.00 | Other transmission shafts and cranks | Free |
| 8483.20 | Housed bearings, incorporating ball or roller bearings: | |
| 8483.20.40 | Flange, take-up, cartridge and hanger units | 4.5% |
| 8483.20.40.40 | Incorporating ball bearings | |
| 8483.20.40.80 | Incorporating roller bearings | |
| 8483.20.80 | Other | 4.5% |
| 8483.20.80.40 | Incorporating ball bearings | |
| 8483.20.80.80 | Incorporating roller bearings | |
| 8483.30 | Bearing housings; plain shaft bearings: | |
| 8483.30.40 | Flange, take-up, cartridge and hanger units | 4.5% |
| 8483.30.40.40 | Ball or roller bearing type | |
| 8483.30.40.80 | Other | |
| 8483.30.80 | Other | 4.5% |
| 8483.30.80.20 | Ball or roller bearing type | |
| 8483.30.80.40 | Other | |
| 8483.30.80.55 | Rod end bearings | |
| 8483.30.80.65 | Other | |
| 8483.30.80.70 | Spherical | |
| 8483.30.80.90 | Other | |
| 8483.40 | Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements entered separately; ball or roller screws; gear boxes and other speed changers, including torque converters: | |
| 8483.40.10.00 | Torque converters | Free |
| 8483.40.30 | Imported for use with machines for making cellulosic pulp, paper or paperboard | Free |
| 8483.40.30.40 | Fixed ratio speed changers | |
| 8483.40.30.80 | Other | |
| 8483.40.50 | Other | 2.5% |
| 8483.40.50.10 | Fixed ratio speed changers | |
| 8483.40.50.20 | Gear boxes and speed changers for wind turbines, as described in statistical note 6 to this chapter | |
| 8483.40.50.80 | Other | |
| 8483.40.70.00 | Other speed changers | 25¢ each + 3.9% |
| 8483.40.80.00 | Ball or roller screws | 3.8% |
| 8483.40.90.00 | Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements entered separately | 2.5% |
| 8483.50 | Flywheels and pulleys, including pulley blocks: | |
| 8483.50.40.00 | Gray-iron awning or tackle pulleys, not over <il>6.4 cm</il> in wheel diameter | 5.7% |
| 8483.50.60.00 | Flywheels | 2.8% |
| 8483.50.90 | Other | 2.8% |
| 8483.50.90.40 | Grooved pulleys | |
| 8483.50.90.80 | Other | |
| 8483.60 | Clutches and shaft couplings (including universal joints): | |
| 8483.60.40 | Clutches and universal joints | 2.8% |
| 8483.60.40.40 | Clutches | |
| 8483.60.40.80 | Universal joints | |
| 8483.60.80.00 | Other | 2.8% |
| 8483.90 | Toothed wheels, chain sprockets and other transmission elements presented separately; parts: | |
| 8483.90.10 | Chain sprockets and parts thereof | 2.8% |
| 8483.90.10.10 | Forged | |
| 8483.90.10.50 | Other | |
| 8483.90.20.00 | Parts of flange, take-up, cartridge and hanger units | 4.5% |
| 8483.90.30.00 | Other | 4.5% |
| 8483.90.50 | Parts of gearing, gear boxes and other speed changers | 2.5% |
| 8483.90.50.10 | Forged gear blanks | |
| 8483.90.50.20 | Parts of gear boxes and speed changers for wind turbines | |
| 8483.90.50.80 | Other | |
| 8483.90.70.00 | Parts of articles of subheading 8483.20 | 5.5% |
| 8483.90.80 | Other | 2.8% |
| 8483.90.80.10 | Parts of articles of subheading 8483.60.80 | |
| 8483.90.80.40 | Parts of universal joints | |
| 8483.90.80.80 | Other | |
| 8484 | Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal; sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packings; mechanical seals: | |
| 8484.10.00.00 | Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal | 2.5% |
| 8484.20.00.00 | Mechanical seals | 3.9% |
| 8484.90.00.00 | Other | 2.5% |
| 8485 | Machines for additive manufacturing: | |
| 8485.10.01.00 | By metal deposit | 2.5% |
| 8485.20.00.00 | By plastics or rubber deposit | 3.1% |
| 8485.30.00.00 | By plaster, cement, ceramics or glass deposit | 2.5% |
| 8485.80.00.00 | Other | 2.5% |
| 8485.90 | Parts: | |
| 8485.90.10.00 | By plastics or rubber deposit | 3.1% |
| 8485.90.90.00 | Other | Free |
| 8486 | Machines and apparatus of a kind used solely or principally for the manufacture of semiconductor boules or wafers, semiconductor devices, electronic integrated circuits or flat panel displays; machines and apparatus specified in note 11(C) to this chapter; parts and accessories: | |
| 8486.10.00.00 | Machines and apparatus for the manufacture of boules or wafers | Free |
| 8486.20.00.00 | Machines and apparatus for the manufacture of semiconductor devices or of electronic integrated circuits | Free |
| 8486.30.00.00 | Machines and apparatus for the manufacture of flat panel displays | Free |
| 8486.40.00 | Machines and apparatus specified in note 11(C) to this chapter | Free |
| 8486.40.00.10 | For the manufacture or repair of masks and reticles | |
| 8486.40.00.20 | For assembling semiconductor devices or electronic integrated circuits | |
| 8486.40.00.30 | For lifting, handling, loading or unloading of boules, wafers, semiconductor devices, electronic integrated circuits and flat panel displays | |
| 8486.90.00.00 | Parts and accessories | Free |
| 8487 | Machinery parts, not containing electrical connectors, insulators, coils, contacts or other electrical features, and not specified or included elsewhere in this chapter: | |
| 8487.10.00 | Ships' or boats' propellers and blades therefor | Free |
| 8487.10.00.40 | Of copper | |
| 8487.10.00.80 | Other | |
| 8487.90.00 | Other | 3.9% |
| 8487.90.00.40 | Oil seals, other than those of chapter 40 | |
| 8487.90.00.80 | Other |